BD83740HFP-M
Functional Description
(Unless otherwise specified, Ta=25°C, VIN=13V, IOUT=6V and RVIN_F=0.47Ω. Numbers are "Typical" values.)
1. Output Current Setting
LED Current IOUT can be set as below depending on values of current setting resistance RVIN_F.
(VIN VIN_F)
IOUT
VIN_F_REF [A]
RVIN_F
RVIN_F
where:
VIN_F_REF is 0.18V (Typ)
IOUT
RVIN_F
VIN_F
VIN
IOUT
CIOUT
PWM_in
VREF
VIN-0.180V
(Typ)
+B
GND
Figure 10. Output Current Setting
2. Table of Operations
PWM dimming mode switches to linear control depending on CRT terminal voltage.
When CRT terminal voltage surpasses VCRT_DIS2(4.0V(Typ)), Dimming mode turns to Linear Control,
and discharge resistance of DISC terminal changes from RD1(50Ω(Typ)) to RD2(5kΩ(Typ)).
LED open detection is activated depending on IOUT terminal voltage status, and output current is turned OFF.
Output current is also turned OFF when Low signal is input to PBUS terminal.
IOUT Terminal
Output Current
Operation Mode
Linear Control
CRT Terminal
Voltage
(VIOUT)
PBUS Terminal
Hi-Z
(IOUT
)
4.0V(Typ)≤VCRT
-
-
50mA~500mA
See Features
Description, 3.
PWM Dimming
Operation
See Features
Description, 3
PWM Dimming
Operation
PWM dimming
Hi-Z
VIOUT ≥
VIN - 0.050V(Typ)
LED Open
-
-
1μA(Max)
1μA(Max)
Low Output
Low Input
PBUS Control OFF
-
www.rohm.com
TSZ02201-0T1T0C700170-1-2
06.Sep.2016 Rev.002
© 2014 ROHM Co., Ltd. All rights reserved.
7/28
TSZ22111・15・001