Datasheet > 过滤器 > SAW 滤波器> B39431B3791Z810

B39431B3791Z810

更新时间： 2024-02-17 15:31:15

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

B39431B3791Z810 技术参数

是否Rohs认证：	符合	生命周期：	Transferred
Reach Compliance Code：	compliant	风险等级：	5.59
其他特性：	INSERTION LOSS INCLUDING LOSS IN MATCHING ELEMENTS	中心频率或截止频率 (fo/fc)：	433.42 MHz
滤波器类型：	SAW FILTER	高度：	1.5 mm
输入阻抗：	640 OHM//1.5 pF	最大插入损耗：	4.5 dB
JESD-609代码：	e4	长度：	3.8 mm
安装类型：	SURFACE MOUNT	功能数量：	1
端子数量：	8	最高工作温度：	80 °C
最低工作温度：	-20 °C	输出阻抗：	640 OHM//1.5 pF Ω
包装材料：	CERAMIC	物理尺寸：	L3.8XB3.8XH1.5 (mm)/L0.15XB0.15XH0.059 (inch)
筛选级别：	AEC-Q200	子类别：	SAW Filters
端子面层：	Gold (Au) - with Nickel (Ni) barrier	宽度：	3.8 mm
Base Number Matches：	1

SAW Components

SAW filter

B3791

433.42 MHz

Data sheet

Matching network to 50 Ω (element values depend on pcb layout and equivalent circuit)

L_s1= 56 nH

L_s2= 56 nH

L_k= 47 nH

Minimising the crosstalk

For a good ultimate rejection a low crosstalk is necessary. Low crosstalk can be realised with a good

RF layout. The major crosstalk mechanism is caused by the “ground-loop” problem.

Grounding loops are created if input-and output transducer GND are connected on the top-side of

the PCB and fed to the system grounding plane by a common via hole. To avoid the common

ground path, the ground pin of the input- and output transducer are fed to the system ground plane

(bottom PCB plane) by their own via hole. The transducers’ grounding pins should be isolated from

the upper grounding plane.

A common GND inductivity of 0.5nH degrades the ultimate rejection (crosstalk) by 20dB.

The optimised PCB layout, including matching network for transformation to 50 Ohm, is shown

here. In this PCB layout the grounding loops are minimised to realise good ultimate rejection

Optimised PCB layout for SAW filters in QCC8B package, pinning 2,5 (top side, scale 1:1)

The bottom side is a copper plane (system ground area). The input and output grounding pins are

isolated and connected to the common ground by separated via holes.

For good contact of the upper grounding area with the lower side it is necessary to place enough

via holes.

Please read cautions and warnings and

important notes at the end of this document.

December 13, 2006

1 2 3 456 7 8

下载PDF

型号	品牌	描述	获取价格	数据表
B39431B3900U410	TDK	SAW Components SAW RF filter	获取价格
B39431B3932H110	EPCOS	SAW filter Short range devices	获取价格
B39431B3933H110	EPCOS	SAW filter Short range devices	获取价格
B39431B3935H110	TDK	SAW Filter, 1 Function(s), 433.92MHz, 6 Pin(s), Ceramic, ROHS COMPLIANT, SMD, DCC6E, 6 PIN	获取价格
B39431B3935H110	EPCOS	1 FUNCTIONS, 433.92 MHz, SAW FILTER, ROHS COMPLIANT, SMD, DCC6E, 6 PIN	获取价格
B39431B3936H110	TDK	SAW Components SAW filter	获取价格