5秒后页面跳转
B39311B3769Z810 PDF预览

B39311B3769Z810

更新时间: 2024-02-20 00:28:16
品牌 Logo 应用领域
爱普科斯 - EPCOS LTE
页数 文件大小 规格书
10页 87K
描述
SAW FILTER

B39311B3769Z810 技术参数

生命周期:ActiveReach Compliance Code:unknown
风险等级:5.59滤波器类型:SAW FILTER
Base Number Matches:1

B39311B3769Z810 数据手册

 浏览型号B39311B3769Z810的Datasheet PDF文件第2页浏览型号B39311B3769Z810的Datasheet PDF文件第3页浏览型号B39311B3769Z810的Datasheet PDF文件第4页浏览型号B39311B3769Z810的Datasheet PDF文件第6页浏览型号B39311B3769Z810的Datasheet PDF文件第7页浏览型号B39311B3769Z810的Datasheet PDF文件第8页 
SAW Components  
SAW filter  
B3769  
314.85 MHz  
Data sheet  
Matching network to 50 (element values depend on pcb layout and equivalent circuit)  
Ls1 = 56 nH  
Ls2 = 56 nH  
Minimising the crosstalk  
For a good ultimate rejection a low crosstalk is necessary. Low crosstalk can be realised with a good  
RF layout. The major crosstalk mechanism is caused by the “ground-loop” problem.  
Grounding loops are created if input-and output transducer GND are connected on the top-side of  
the PCB and fed to the system grounding plane by a common via hole. To avoid the common  
ground path, the ground pin of the input- and output transducer are fed to the system ground plane  
(bottom PCB plane) by their own via hole. The transducers’ grounding pins should be isolated from  
the upper grounding plane.  
A common GND inductivity of 0.5nH degrades the ultimate rejection (crosstalk) by 20dB.  
The optimised PCB layout, including matching network for transformation to 50 Ohm, is shown  
here. In this PCB layout the grounding loops are minimised to realise good ultimate rejection  
Optimised PCB layout for SAW filters in QCC8B package, pinning 2,5 (top side, scale 1:1)  
The bottom side is a copper plane (system ground area). The input and output grounding pins are  
isolated and connected to the common ground by separated via holes.  
For good contact of the upper grounding area with the lower side it is necessary to place enough  
via holes.  
Please read cautions and warnings and  
important notes at the end of this document.  
5
December 21, 2012  

与B39311B3769Z810相关器件

型号 品牌 描述 获取价格 数据表
B39311-B3769-Z810 EPCOS SAW Components Low-loss Filter 314,85 MHz

获取价格

B39311B3784Z810 EPCOS SAW RF filter Short range devices

获取价格

B39311B3917U410 TDK SAW Filter, 1 Function(s), 313.6MHz, ROHS COMPLIANT, DCC6C, SMD, 6 PIN

获取价格

B39311B3950H110 TDK SAW Components SAW filter

获取价格

B39311B5251H810 EPCOS SAW IF filter WLL

获取价格

B39311B5254H810 TDK SAW Components SAW IF filter for base stations

获取价格