ATF16V8B-10SC

更新时间： 2024-02-24 22:13:28

品牌	Logo	应用领域
爱特美尔 - ATMEL		闪存
页数	文件大小	规格书
16页	658K
描述
High Performance Flash PLD

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

ATF16V8B-10SC 技术参数

是否Rohs认证：	不符合	生命周期：	Obsolete
零件包装代码：	TSSOP	包装说明：	TSSOP, TSSOP20,.25
针数：	20	Reach Compliance Code：	not_compliant
HTS代码：	8542.39.00.01	风险等级：	5.77
架构：	PAL-TYPE	最大时钟频率：	68 MHz
JESD-30 代码：	R-PDSO-G20	JESD-609代码：	e0
长度：	6.5 mm	湿度敏感等级：	2
专用输入次数：	8	I/O 线路数量：	8
输入次数：	18	输出次数：	8
产品条款数：	64	端子数量：	20
最高工作温度：	85 °C	最低工作温度：	-40 °C
组织：	8 DEDICATED INPUTS, 8 I/O	输出函数：	MACROCELL
封装主体材料：	PLASTIC/EPOXY	封装代码：	TSSOP
封装等效代码：	TSSOP20,.25	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	峰值回流温度（摄氏度）：	240
电源：	5 V	可编程逻辑类型：	FLASH PLD
传播延迟：	10 ns	认证状态：	Not Qualified
座面最大高度：	1.2 mm	子类别：	Programmable Logic Devices
最大供电电压：	5.5 V	最小供电电压：	4.5 V
标称供电电压：	5 V	表面贴装：	YES
技术：	CMOS	温度等级：	INDUSTRIAL
端子面层：	Tin/Lead (Sn/Pb)	端子形式：	GULL WING
端子节距：	0.65 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	30	宽度：	4.4 mm
Base Number Matches：	1

ATF16V8B-10SC 数据手册

ATF16V8B

Macrocell Configuration

Software compilers support the three different OMC

modes as different device types. Most compilers have the

ability to automatically select the device type, generally

based on the register usage and output enable (OE) us-

age. Register usage on the device forces the software to

choose the registered mode. All combinatorial outputs

with OE controlled by the product term will force the soft-

ware to choose the complex mode. The software will

choose the simple mode only when all outputs are dedi-

cated combinatorial without OE control. The different de-

vice types can be used to override the automatic device

selection by the software. For further details, refer to the

compiler software manuals.

In registered mode pin 1 and pin 11 are permanently con-

figured as clock and output enable, respectively. These

pins cannot be configured as dedicated inputs in the reg-

istered mode.

In complex mode pin 1 and pin 11 become dedicated in-

puts and use the feedback paths of pin 19 and pin 12 re-

spectively. Because of this feedback path usage, pin 19

and pin 12 do not have the feedback option in this mode.

In simple mode all feedback paths of the output pins are

routed via the adjacent pins. In doing so, the two inner

most pins (pins 15 and 16) will not have the feedback op-

tion as these pins are always configured as dedicated

combinatorial output.

When using compiler software to configure the device, the

user must pay special attention to the following restrictions

in each mode.

ATF16V8B Registered Mode

PAL Device Emulation / PAL Replacement

sum term. When the macrocell is configured as an input,

the output enable is permanently disabled.

The registered mode is used if one or more registers are

required. Each macrocell can be configured as either a

registered or combinatorial output or I/O, or as an input.

For a registered output or I/O, the output is enabled by the

OE pin, and the register is clocked by the CLK pin. Eight

product terms are allocated to the sum term. For a combi-

natorial output or I/O, the output enable is controlled by a

product term, and seven product terms are allocated to the

Any register usage will make the compiler select this

mode. The following registered devices can be emulated

using this mode:

16R8 16RP8

16R6 16RP6

16R4 16RP4

Combinatorial Configuration for

Registered Mode ^{(1, 2)}

Registered Configuration

for Registered Mode^{(1, 2)}

Notes:

1. Pin 1 and Pin 11 are permanently configured as CLK and

OE.

2. The development software configures all the architecture

control bits and checks for proper pin usage automatically.

1. Pin 1 controls common CLK for the registered outputs.

Pin 11 controls common OE for the registered outputs.

Pin 1 and Pin 11 are permanently configured as CLK and OE.

2. The development software configures all the architecture

control bits and checks for proper pin usage automatically.

1-13

1...4 5 678 9 10...16

中文翻译

下载PDF

ATF16V8B-10SC 替代型号

型号	品牌	替代类型	描述	数据表
ATF16V8B-15SU	ATMEL	类似代替	Highperformance EE PLD
PALCE16V8H-10SC/4	LATTICE	类似代替	EE CMOS Zero-Power 20-Pin Universal Programmable Array Logic
ATF16V8B-10SI	ATMEL	功能相似	High Performance Flash PLD

与ATF16V8B-10SC相关器件

型号	品牌	获取价格	描述	数据表
ATF16V8B-10SI	ATMEL	获取价格	High Performance Flash PLD
ATF16V8B-10SJ	ATMEL	获取价格	Flash PLD, 10ns, CMOS, PDSO20, 0.300 INCH, PLASTIC, MS-013, SOIC-20
ATF16V8B-10SL	ATMEL	获取价格	Flash PLD, 10ns, CMOS, PDSO20, 0.300 INCH, PLASTIC, MS-013, SOIC-20
ATF16V8B-10XC	ATMEL	获取价格	Highperformance EE PLD
ATF16V8B-10XI	ATMEL	获取价格	Highperformance EE PLD
ATF16V8B-10XJ	ATMEL	获取价格	Flash PLD, 10ns, CMOS, PDSO20, 4.40 MM, PLASTIC, MO-153AC, TSSOP-20
ATF16V8B-10XL	ATMEL	获取价格	Flash PLD, 10ns, CMOS, PDSO20, 4.40 MM, PLASTIC, MO-153AC, TSSOP-20
ATF16V8B-15GC	ETC	获取价格	Electrically-Erasable PLD
ATF16V8B-15GI	ETC	获取价格	Electrically-Erasable PLD
ATF16V8B-15GM	ATMEL	获取价格	Flash PLD, 15ns, PAL-Type, CMOS, CDIP20, 0.300 INCH, CERDIP-20

与ATF16V8B-10SC相关文章

LM317T数据手册解读：产品特性、应用、封装与引脚详解
2024-06-14

11
一文带你了解?DB3二极管好坏判断、参数信息、替代推荐
2024-06-14

14
LM358DR数据手册：引脚说明、电气参数及替换型号推荐
2024-06-14

8
OP07CP数据手册解读：引脚信息、电子参数
2024-06-14

12

产品中心

服务支持

精选活动

关于我们

帮助中心

ATF16V8B-10SC

ATF16V8B-10SC 技术参数

ATF16V8B-10SC 数据手册

ATF16V8B-10SC 替代型号

与ATF16V8B-10SC相关器件

与ATF16V8B-10SC相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ATF16V8B-10SC

ATF16V8B-10SC 技术参数

ATF16V8B-10SC 数据手册

ATF16V8B-10SC 替代型号

与ATF16V8B-10SC相关器件

与ATF16V8B-10SC相关文章

您还可以找

您在本页遇到什么问题？