ATA6626

更新时间： 2024-02-17 03:20:04

品牌	Logo	应用领域
爱特美尔 - ATMEL		总线收发器稳压器
页数	文件大小	规格书
29页	471K
描述
LIN Bus Transceiver with 3.3V (5V) Regulator and Watchdog

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

ATA6626 技术参数

是否Rohs认证：	符合	生命周期：	Obsolete
零件包装代码：	QFN	包装说明：	HVQCCN,
针数：	20	Reach Compliance Code：	unknown
ECCN代码：	EAR99	HTS代码：	8542.39.00.01
风险等级：	5.62	Is Samacsys：	N
JESD-30 代码：	S-XQCC-N20	长度：	5 mm
功能数量：	1	端子数量：	20
最高工作温度：	125 °C	最低工作温度：	-40 °C
封装主体材料：	UNSPECIFIED	封装代码：	HVQCCN
封装形状：	SQUARE	封装形式：	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
认证状态：	Not Qualified	座面最大高度：	1 mm
表面贴装：	YES	电信集成电路类型：	INTERFACE CIRCUIT
温度等级：	AUTOMOTIVE	端子形式：	NO LEAD
端子节距：	0.65 mm	端子位置：	QUAD
宽度：	5 mm	Base Number Matches：	1

ATA6626 数据手册

3.13 TM Input Pin

3.14 KL_15 Pin

The TM pin is used for final production measurements at Atmel^®. In normal application, it has to

be always connected to GND.

The KL_15 pin is a high-voltage input used to wake up the device from Sleep or Silent Mode. It

is an edge sensitive pin (low-to-high transition). It is usually connected to ignition to generate a

local wake-up in the application when the ignition is switched on. Although KL_15 pin is high

voltage (V_Batt), it is possible to switch the IC into Sleep or Silent Mode. Connect the KL_15 pin

directly to GND if you do not need it. A debounce timer with a typical Tdb_{Kl_15}of 160 µs is

implemented.

The input voltage threshold can be adjusted by varying the external resistor due to the input cur-

rent I_{KL_15}. To protect this pin against voltage transients, a serial resistor of 50 kΩ and a ceramic

capacitor of 100 nF are recommended. With this RC combination you can increase the wake-up

time Tw_{KL_15}and, therefore, the sensitivity against transients on the ignition Kl.30.

You can also increase the wake-up time using external capacitors with higher values.

3.15 INH Output Pin

The INH Output pin is used to switch an external voltage regulator on during Normal or Fail-safe

Mode. The INH pin is switched off in Sleep or Silent Mode. It is possible to switch off the external

1 kΩ master resistor via the INH pin for master node applications. The INH pin is switched off

during VCC undervoltage reset.

3.16 Reset Output Pin (NRES)

The Reset Output pin, an open drain output, switches to low during V_CCundervoltage or a

watchdog failure.

3.17 WD_OSC Output Pin

The WD_OSC Output pin provides a typical voltage of 1.2V, which supplies an external resistor

with values between 34 kΩ and 120 kΩ to adjust the watchdog oscillator time.

3.18 NTRIG Input Pin

The NTRIG Input pin is the trigger input for the window watchdog. A pull-up resistor is imple-

mented. A negative edge triggers the watchdog. The trigger signal (low) must exceed a

minimum time t_trigminto generate a watchdog trigger.

3.19 Wake-up Events from Sleep or Silent Mode

• LIN-bus

• WAKE pin

• EN pin

• KL_15

ATA6622/ATA6624/ATA6626

4986F–AUTO–07/08

1...3 4 567 8 9...29

下载PDF

与ATA6626相关器件

型号	品牌	描述	获取价格	数据表
ATA6626C	ATMEL	Typically 10 μA Supply Current During Sleep M	获取价格
ATA6626C	MICROCHIP	Fully integrated LIN specification 2.0, 2.1 and SAEJ2602-compliant transceiver with a low-	获取价格
ATA6626C-PGQW	ATMEL	LIN Bus Transceiver with 3.3V (5V) Regulator and Watchdog	获取价格
ATA6626C-PGQW-1	ATMEL	Interface Circuit, 5 X 5 MM, LEAD FREE, VQFN-20	获取价格
ATA6626C-PGQW-1	MICROCHIP	IC TXRX LIN BUS REG 20QFN	获取价格
ATA6626-PGQW	ATMEL	LIN Bus Transceiver with 3.3V (5V) Regulator and Watchdog	获取价格

与ATA6626相关文章

深入解析AD7606高性能多通道模数转换器：资料手册参数分析
2024-05-10

3
74HC573三态非易失锁存器(Latch)资料手册参数分析
2024-05-10

2
MAX3232 RS-232电平转换器资料手册参数分析
2024-05-10

4
MAX485 RS-485/RS-422收发器资料手册参数分析
2024-05-10

4

产品中心

服务支持

精选活动

关于我们

帮助中心

ATA6626

ATA6626 技术参数

ATA6626 数据手册

与ATA6626相关器件

与ATA6626相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ATA6626

ATA6626 技术参数

ATA6626 数据手册

与ATA6626相关器件

与ATA6626相关文章

您还可以找

您在本页遇到什么问题？