ATA6560/1
2.0
ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings †
DC Voltage at CANH, CANL (VCANH, VCANL) ................................................................................................–27 to +42V
Transient Voltage at CANH, CANL (according to ISO 7637 part 2) (VCANH, VCANL) .................................–150 to +100V
DC Voltage on all other pins (VX).................................................................................................................–0.3 to +5.5V
ESD according to IBEE CAN EMC - Test specification following IEC 61000-4-2 — Pin CANH, CANL ..................±8 kV
ESD (HBM following STM5.1 with 1.5 kΩ/100 pF) - Pins CANH, CANL to GND.................................................... ±6 kV
Component-Level ESD (HBM according to ANSI/ESD STM5.1, JESD22-A114, AEC-Q100 (002) ........................±4 kV
CDM ESD STM 5.3.1..............................................................................................................................................±750V
ESD Machine Model AEC-Q100-RevF(003)...........................................................................................................±200V
Virtual Junction Temperature (TvJ) .............................................................................................................–40 to +150°C
Storage Temperature Range (Tstg) ............................................................................................................–55 to +150°C
† Notice: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at these or any other conditions above those
indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
Electrical Specifications: TvJ = –40°C to +150°C; VVCC = 4.5V to 5.5V; VVIO = 2.8V to 5.5V; RL = 60, CL = 100 pF,
unless otherwise; all voltages are defined in relation to ground; positive currents flow into the IC.
Parameters
Supply, Pin VCC
Sym.
Min.
Typ.
Max.
Units
Conditions
Supply Voltage
VVCC
4.5
1.9
—
5.5
3.2
V
Supply Current in Silent Mode
IVCC_sil
2.5
mA
Silent mode,
TXD = VVIO
V
Supply Current in Normal
Mode
IVCC_rec
2
—
5
mA
Recessive,
VTXD = VVIO
IVCC_dom
IVCC_STBY
20
—
50
—
70
12
mA
µA
Dominant, VTXD = 0V
Supply Current in Standby
Mode
VVCC = VVIO,
VTXD = VNSIL = VVIO
IVCC_STBY
Vuvd(VCC)
—
7
—
µA
V
Ta = +25°C (Note 3)
Undervoltage Detection
Threshold on Pin VCC
2.75
—
4.5
I/O Level Adapter Supply, Pin VIO (only for the ATA6561)
Supply Voltage on Pin VIO
Supply Current on Pin VIO
VVIO
2.8
10
—
5.5
V
IIO_rec
80
250
µA
Normal and Silent
modes
Recessive,
VTXD = VVIO
IIO_rdom
50
350
500
µA
Normal and Silent
modes
Dominant, VTXD = 0V
IIO_STBY
Vuvd(VIO)
—
—
—
1
µA
V
Standby mode
Undervoltage Detection
Threshold on Pin VIO
1.3
2.7
Note 1: This parameter is 100% correlation tested.
2: This parameter is ensured by characterization on samples.
3: This parameter is ensured by design.
DS20005991B-page 10
2018-2019 Microchip Technology Inc.