AT27C256R
Block Diagram
Absolute Maximum Ratings*
*NOTICE:
Stresses beyond those listed under “Absolute Maxi-
mum Ratings” may cause permanent damage to
the device. This is a stress rating only and func-
tional operation of the device at these or any other
conditions beyond those indicated in the opera-
tional sections of this specification is not implied.
Exposure to absolute maximum rating conditions
for extended periods may affect device reliability.
Temperature Under Bias................................ -55°C to +125°C
Storage Temperature..................................... -65°C to +150°C
Voltage on Any Pin with
(1)
Respect to Ground .........................................-2.0V to +7.0V
Voltage on A9 with
Respect to Ground ......................................-2.0V to +14.0V(1)
Note:
1. Minimum voltage is -0.6V dc which may undershoot
to -2.0V for pulses of less than 20 ns.Maximum out-
put pin voltage is VCC + 0.75V dc which may over-
shoot to +7.0 volts for pulses of less than 20 ns.
VPP Supply Voltage with
Respect to Ground .......................................-2.0V to +14.0V(1)
Operating Modes
Mode\Pin
CE
VIL
VIL
VIH
VIL
OE
VIL
VIH
Ai
Ai
VPP
VCC
VCC
VCC
VPP
VPP
VCC
VPP
Outputs
DOUT
Read
Output Disable
Standby
X(1)
X(1)
Ai
High Z
High Z
DIN
X(1)
Rapid Program(2)
PGM Verify(2)
Optional PGM Verify(2)
PGM Inhibit(2)
VIH
VIL
VIL
VIH
X(1)
Ai
DOUT
VIL
VIH
Ai
DOUT
X(1)
High Z
(3)
A9 = VH
Product Identification(4)
VIL
VIL
A0 = VIH or VIL
A1 - A14 = VIL
VCC
Identification Code
Notes: 1. X can be VIL or VIH.
2. Refer to Programming Characteristics.
3. VH = 12.0 ± 0.5V.
4. Two identifier bytes may be selected. All Ai inputs are held low (VIL), except A9 which is set to VH and A0 which is toggled low
(VIL) to select the Manufacturer’s Identification byte and high (VIH) to select the Device Code byte.
3