RE (ARE)
2. Specifications
Characteristics
Item
Specifications
Arrangement
1 Form C
Contact
Contact material
Gold plating
Initial contact resistance, max.
Max. 100mΩ (By voltage drop 10V AC 10mA)
1W (at 2.6 GHz [Impedance 75Ω;, V.S.W.R. Max.1.5] [Impedance 50Ω, V.S.W.R. Max.1.7])
10mA 24V DC (resistive load)
Contact rating
Contact carrying power
Max. switching voltage
Max. switching current
Nominal operating power
V.S.W.R.
10W (at 2.6GHz [Impedance 75Ω, V.S.W.R. Max.1.5] [Impedance 50Ω, V.S.W.R. Max.1.7])
30V DC
Rating
0.5A DC
200mW
Max. 1.2 (to 900MHz), Max. 1.5 (to 2.6GHz)
Max. 0.2dB (to 900MHz), Max. 0.5dB (to 2.6GHz)
Min. 60dB (to 900MHz), Min. 30dB (to 2.6GHz)
Max. 1.3 (to 900MHz), Max. 1.7 (to 2.6GHz)
Max. 0.2dB (to 900MHz), Max. 0.7dB (to 2.6GHz)
Min. 60dB (to 900MHz), Min. 30dB (to 2.6GHz)
High frequency
characteristics(Initial) Insertion loss
(Impedance 75Ω)
Isolation
V.S.W.R.
High frequency
characteristics(Initial) Insertion loss
(Impedance 50Ω)
Isolation
Min. 100MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
Insulation resistance (Initial)
Between open contacts
Between contact and coil
500 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
Breakdown
voltage
(Initial)
Electrical
Between contact and earth terminal 500 Vrms for 1min. (Detection current: 10mA)
characteristics
Max. 60°C (By resistive method, nominal voltage applied to the coil: Contact carrying power:
10W, at 2.6GHz, [Impedance 75Ω, V.S.W.R. 1.5] [Impedance 50Ω, V.S.W.R. 1.7])
Max. 10ms (Nominal operating voltage applied to the coil, excluding contact bounce time.)
Temperature rise (at 20°C)
Operate time (at 20°C)
Release time (at 20°C)
Max. 5ms (Nominal operating voltage applied to the coil, excluding contact bounce time.)
(without diode)
Functional
Shock
Min. 500 m/s2 {50 G} (Half-wave pulse of sine wave: 11ms; detection time: 10µs.)
Min. 1,000m/s2 {100 G} (Half-wave pulse of sine wave: 6ms.)
10 to 55 Hz at double amplitude of 3mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 5mm
resistance
Destructive
Functional
Destructive
Mechanical
characteristics
Vibration
resistance
Mechanical
Electrical
Min. 106 (at 180 cpm)
Min. 3×105 (1W, 2.6GHz, [Impedance 75Ω, V.S.W.R. 1.5] [Impedance 50Ω, V.S.W.R. 1.7])
Expected life
Min. 3×105 (10mA 24V DC (resistive load) (at 20cpm))
Ambient temperature: –40°C to +70°C –40°F to +158°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions
Unit weight
Conditions for operation, transport and storage*
Approx. 5 g .18 oz
Note: * The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to [6] AMBIENT ENVIRONMENT
in GENERAL APPLICATION GUIDELINES.
REFERENCE DATA
1-(1). High frequency characteristics (Impedance 50Ω) (Standard PC board terminal)
• V.S.W.R. characteristics
• Insertion loss characteristics
• Isolation characteristics
0
0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
10
20
30
40
50
60
70
80
90
COM-NC
COM-NC
COM-NO
COM-NC
COM-NO
COM-NO
1.0
1
100
900MHz
3GHz
900MHz
3GHz
900MHz
3GHz
Frequency
Frequency
Frequency
ASCTB104E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/