Datasheet > AP8802EV2

AP8802EV2

更新时间： 2024-01-28 20:12:41

品牌	Logo	应用领域
美台 - DIODES		/
页数	文件大小	规格书
8页	216K
描述
step-down DC/DC converter designed to drive LEDs with a constant current.

阅读下载

中文翻译

获取价格

如果您发现信息不准确，欢迎纠错

AP8802EV2 数据手册

AP8802EV2 USER GUIDE

DESCRIPTION

The AP8802EV2, Figure 1, is a PCB constructed using an FR4 base for evaluating the AP8802 LED

driver with internal switch in the SOP 8L-EP package. The evaluation board can be used to drive an

external choice of LEDs; the total forward voltage across the LEDs depending on the number and

type connected. [1]

The suggested operating voltage for the evaluation board ranges from 8V to 45V maximum.

Higher voltage means lower supply current.

The nominal current for the evaluation board is set at 1A with a 0R2 sense resistor, R1.

Test point CTRL provides a connection point for DC or PWM dimming and shutdown.

Note: The evaluation board does not have reverse polarity protection

Warning: with 1A output, the connected LED will be hot and very bright

Figure 1: AP8802EV2 evaluation board

AP8802 DEVICE DESCRIPTION

The AP8802 is a step-down DC/DC converter designed to drive LEDs with a constant current. The

device can drive up to thirteen LEDs, depending largely on the forward voltage of the LEDs in series,

from a voltage source of 8V to 48V. Series connection of the LEDs provides identical LED currents,

resulting in uniform brightness and eliminates the need for ballast resistors. The AP8802 switches at

frequencies up to 500KHz. This allows the use of small size external components, hence minimizing

the PCB area needed.

The maximum output current of the AP8802 is set via an external resistor connected between the V_IN

and SET input pins. Dimming is achieved by applying either a DC voltage or a PWM signal at the

CTRL input pin. An input voltage of 0.2V or lower at CTRL shuts down the output at SW and puts the

device into a low-current standby state.

The device includes the output switch and a current sense circuit, which requires an external sense

resistor to set the nominal current up to 1A.

Issue 5 – August 2009

www.diodes.com

12 3 4 5 6 7 8

中文翻译

下载PDF

型号	品牌	获取价格	描述	数据表
AP8802FNG-7	DIODES	获取价格	1A LED Step-Down Converter
AP8802H	DIODES	获取价格	60V 1A LED Step-down Converter
AP8802HSP-13	DIODES	获取价格	60V 1A LED Step-down Converter
AP8802SG-13	DIODES	获取价格	1A LED Step-Down Converter
AP8802SPG	DIODES	获取价格	step-down DC/DC converter designed to drive LEDs with a constant current.
AP8802SPG-13	DIODES	获取价格	1A LED Step-Down Converter
AP8803	DIODES	获取价格	Cost effective 3W LED driver for consumer applications
AP8803-WTG-7	DIODES	获取价格	LED DISPLAY DRIVER, PDSO5, ROHS COMPLIANT, TSOT-23, 5 PIN
AP8803WTG-7	DIODES	获取价格	Cost effective 3W LED driver for consumer applications
AP8821	APLUS	获取价格	21 sec VOICE OTP