Outline Drawing
Recommended SMT Attachment
1
2
3
The AMMP Packaged Devices are
compatible with high volume
surface mount PCB assembly
processes.
AMMP
XXXX
0.200
(5.08)
8
4
YWWDNN
The PCB material and mounting
pattern, as defined in the data
sheet, optimizes RF performance
and is strongly recommended.
An electronic drawing of the land
pattern is available upon request
from Agilent Sales & Application
Engineering.
7
6
5
0.200 (5.08)
0.075 (1.91)
FRONT VIEW
SIDE VIEW
Figure 22.
0.114 (2.90)
0.018 (0.46)
0.011 (0.28)
0.014 (0.365)
Manual Assembly
3
2
1
1. Follow ESD precautions while
handling packages.
0.016 (0.40)
2. Handling should be along the
edges with tweezers.
8
4
0.126
(3.2)
0.059
(1.5)
0.100 (2.54)
0.012 (0.30)
3. Recommended attachment is
conductive solder paste.
Please see recommended sol-
der reflow profile. Conductive
epoxy is not recommended.
Hand soldering is not recom-
mended.
0.029 (0.75)
5
6
7
0.016 (0.40)
0.100 (2.54)
0.028 (0.70)
0.93 (2.36)
BACK VIEW
NOTES:
1. INDICATES PIN 1
2. DIMENSIONS ARE IN INCHES (MILLIMETERS)
3. DIMENSIONAL TOLERANCES: 0.002 INCH (0.5mm)
4. Apply solder paste using a
stencil printer or dot place-
ment. The volume of solder
paste will be dependent on
PCB and component layout
and should be controlled to
ensure consistent mechanical
and electrical performance.
Figure 23.
Suggested PCB Material and Land Pattern
0.093
(2.36)
5. Follow solder paste and
vendor’s recommendations
when developing a solder
reflow profile. A standard
profile will have a steady ramp
up from room temperature to
the pre-heat temperature to
avoid damage due to thermal
shock.
0.010
(0.25)
0.011 (0.28)
0.016(0.40)
0.0095 (0.24)
0.016 (0.40)
0.126 (3.20) 0.059 (1.50) 0.020 (0.50)
0.012 (0.30)
6. Packages have been qualified to
withstand a peak temperature
of 260°C for 20 seconds. Verify
that the profile will not expose
device beyond these limits.
GROUND VIAS SHOULD
BE SOLDER FILLED
0.018 (0.46)
0.018 (0.46)
0.0095 (0.024)
0.114 (2.90)
INCHES (MILLIMETERS).
MATERIAL IS ROGERS RO4350, 0.010-INCH THICK.
Figure 24.
7