Datasheet > AMIS-710324

AMIS-710324

更新时间： 2022-04-23 23:00:11

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

AMIS-710324 数据手册

AMIS-710324-A4: 300dpi CIS Module

Data Sheet

1.0 General Description

The AMIS-710324-A4 (PI324MC-A4) is a contact image sensor (CIS) module. It is a dual-analog-output contact image sensor, using

MOS image sensor technology for high-speed performance and high sensitivity. The AMIS-710324-A4 is suitable for scanning A4 size

(216mm) documents with 11.8 dots per millimeter (dpm) resolution. Applications include fax machines, game systems, a variety of mark

readers and other automation equipment requiring document scanners.

2.0 Key Features

• Light source, lens and sensor are integrated into a single module

• 11.8dpm resolution, 216mm total scanning length (2592 pixels long)

• Two independent analog outputs (split into two sections of 1248 pixels and 1344 pixels)

• Up to 270µsec/line scanning speed with red light source

• Wide dynamic range

• Red LED light source

• Compact size ≅ 14mm x 19mm x 232mm

• Low power

• Light weight

3.0 Functional Description

The AMIS-710324-A4 imaging array consists of 27 sensors, AMIS-720321 (PI3021), produced by AMI Semiconductor. The sensor is a

monolithic chip with an array of 96 photo sensing elements, of which 27 are cascaded to provide 2592 photo-detectors. Additionally,

these chips give the users the readout flexibility in selecting their desired data format. These cascaded chips are segregated into two

electrically independent sections of 13 chips and 14 chips, but they are still contiguously aligned in a single row, see Figure 1 (the

module's block diagram). This configuration lends itself to a positional stream of video pixels, whether they are read in parallel or

sequentially from the two output ports.

Each chip contains a set of multiplex switches, and a digital shift register to control the chips sequential readout. Additionally, the chips

contain a chip selection switch that is interrogated in a sequence as each predecessor chip completes its scanning process. Since this

module has two output ports from two independently controlled sections of chips, the users are required to enter a set of control clocks

and power into each section through the two provided connectors located on each end of the module.

AMI Semiconductor – Jun. 06, M-20564-001

www.amis.com

12 3 4 5 6 7...9

下载PDF

型号	品牌	描述	获取价格	数据表
AMIS-710324-A4	AMI	300dpi CIS Module	获取价格
AMIS-710325	AMI	300dpi CIS Module	获取价格
AMIS-710325-A4	AMI	300dpi CIS Module	获取价格
AMIS-710330	AMI	300dpi CIS Two-Level Digital Output Module	获取价格
AMIS-710400	AMI	400dpi CIS Module	获取价格
AMIS-710400-A4	ONSEMI	AMIS-710400-A4	获取价格