AH1889
HIGH SENSIVITY DUAL UNIPOLAR HALL-EFFECT SWITCH
Description
Pin Assignments
AH1889 is a high sensitivity dual output Unipolar Hall effect IC which
can detect either a North or South pole independently and switch one
of its two outputs with internal pull up and pull down capability. The
AH1889 is mainly designed for low voltage applications which require
a quick response time and can operate over the supply voltage of
1.65V to 3.6V. To minimize PCB space AH1889 outputs have internal
pull up and pull down capability and is packaged in a small low profile
SOT553 package.
(Top View)
A South pole of sufficient strength will turn OUTPUT1 on and a North
pole of sufficient strength with turn on OUTPUT2. While the magnetic
flux density (B) perpendicular to the package is larger than operate
point Bops or Bopn, the appropriate output will be turned on (pulled
low), the output is held until B is lower than release point Brps or
Brps, then turned off (high). The outputs will be turned off and will
remain off when there is no magnetic field.
SOT553
Applications
Features
Position and proximity detection for consumer, office equipments
and industrial applications
Two Monolithic Unipolar Hall Effect Sensor Switch
.
.
Operation with a South Pole (OUTPUT1)
Operation with a North Pole (OUTPUT2)
Open and close detect switches for home appliances
Door, lids, tray position detect switches
Supply Voltage of 1.65V to 3.6V
Magnetic field direction detection
Quick Response Time Without Sleep Mode
Chopper Stabilized Design Provides:
Contact-less switches for consumer and industrial applications
.
.
.
Superior Temperature Stability
Extremely low Switch-Point Drift
Enhanced immunity to physical stress
Good RF Noise Immunity
-40°C to +85°C Operating Temperature
ESD (Human Body Model) >4kV
Small and Low Profile SOT553 package
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Typical Applications Circuit
Note:
4. CIN is for power stabilization and to strengthen the noise immunity, the recommended capacitance 100nF typical.
1 of 7
www.diodes.com
April 2013
© Diodes Incorporated
AH1889
Document number: DS36256 Rev. 1 - 2