AH1891
MINIATURE MICROPOWER OMNIPOLAR
HALL EFFECT SWITCH
Description
Pin Assignments
The AH1891 is a miniature micropower Omnipolar Hall effect
switch IC with dual outputs specifically designed for portable
and battery powered equipment such as cellular phones and
portable PCs. To support battery powered equipment the
AH1891 has been optimized to operate over the supply range
of 1.8V to 3.3V and uses a sleep function to give an average
supply current of only 7uA. To minimize PCB space the
AH1891 is packaged in the small CSP package
(0.8mmx0.8mm) and the design integrates the external pull
up resistors to simplify the applications circuit.
(Top View)
(Bottom View)
A1
A2
A2
B2
A1
B1
B1
B2
The outputs of the AH1891 are switched with either a North or
South pole of sufficient strength. When the magnetic flux
density (B) is larger than operate point (Bop), Output 1 will
pull low and Output 2 will be inverted (high). The output states
are held until B is lower than release point (Brp).
The AH1891 is available in U-WLB0808-4 package.
Features
Applications
•
•
•
•
•
•
Omnipolar (North or South) operation
Low supply voltage of 1.8V to 3.3V
Micropower operation
Dual outputs for design flexibility
Internal pull up and pull down capability
Chopper stabilized design for:
•
•
•
•
Cellular phones
Portable PCs and PDAs
Digital cameras
Portable and battery powered applications
o
o
o
Superior temperature stability
Superior temperature stability
Superior temperature stability
•
•
•
Good RF noise immunity
-40°C to 85°C Operating Temperature
ESD > 4KV in Human Body Mode
•
Miniature CSP package 0.8mm x 0.8mm
Typical Application Circuit
Output 1
Output 2
Vdd
AH1891
GND
1 of 7
www.diodes.com
April 2011
© Diodes Incorporated
AH1891
Document number: DS35207 Rev. 1 - 2