AH1822
MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR
SWITCH
General Description
Features
AH1822 is comprised of two Hall effect plates and an open-drain
•
•
Micropower operation
Operation with magnetic field of either north or south
pole (omnipolar)
2.5V to 5.5V battery operation
Chopper stabilized
output driver, mainly designed for battery-operation, hand-held
equipment (such as Cellular and Cordless Phone, PDA). The
total power consumption in normal operation is typically 24μW
with a 3V power source.
•
•
• Superior temperature stability
• Extremely Low Switch-Point Drift
• Insensitive to Physical Stress
Good RF noise immunity
-40°C to 85°C operating temperature
ESD (HBM) > 5KV
Either north or south pole of sufficient strength will turn the output
on. The output will be turned off under no magnetic field. While
the magnetic flux density (B) is larger than operating point (Bop),
the output will be turned on (low), the output is held until B is
lower than release point (Brp), then turned off.
•
•
•
•
DFN2015-6 and DFN3020-6: Available in “Green”
Molding Compound (No Br, Sb)
•
Lead Free Finish/ RoHS Compliant (Note 1)
Applications
•
•
•
Cover switch in clam-shell cellular phones
Cover switch in Notebook PC/PDA
Contact-less switch in consumer products
Ordering Information
AH 1822 - XXX G - 7
Green
Packing
Package
FT4 : DFN2015-6
FU4 : DFN3020-6
G : Green
7 : Tape & Reel
7” Tape and Reel
Packaging
(Note 2)
Package
Device
Code
Quantity
Part Number Suffix
AH1822-FT4G-7
AH1822-FU4G-7
FT4
FU4
DFN2015H4-6
DFN3020H4-6
3000/Tape & Reel
3000/Tape & Reel
-7
-7
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
AH1822 Rev. 5
1 of 9
FEBRUARY 2009
www.diodes.com
© Diodes Incorporated