Datasheet > AH183-WL-7

AH183-WL-7

更新时间： 2024-01-01 01:27:47

品牌	Logo	应用领域
美台 - DIODES		传感器换能器
页数	文件大小	规格书
10页	130K
描述
Hall Effect Sensor, 1mT Min, 6mT Max, 0.30V, Rectangular, Surface Mount, ROHS COMPLIANT, SC-59, 3 PIN

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

AH183-WL-7 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Active	Reach Compliance Code：	compliant
风险等级：	5.67	其他特性：	BATTERY OPERATION
主体宽度：	1.6 mm	主体高度：	1.206 mm
主体长度或直径：	3 mm	滞后：	1 mT
JESD-609代码：	e3	最大磁场范围：	6 mT
最小磁场范围：	1 mT	安装特点：	SURFACE MOUNT
最大工作电流：	2 mA	最高工作温度：	85 °C
最低工作温度：	-40 °C	输出范围：	0.30V
输出类型：	ANALOG VOLTAGE	封装形状/形式：	RECTANGULAR
传感器/换能器类型：	MAGNETIC FIELD SENSOR,HALL EFFECT	最大供电电压：	5.5 V
最小供电电压：	2.5 V	表面贴装：	YES
端子面层：	Matte Tin (Sn)	端接类型：	SOLDER
Base Number Matches：	1

AH183-WL-7 数据手册

AH182/AH183

LOW POWER HALL EFFECT SWITCH

General Description

Features

AH182/AH183 is a three-terminal Hall effect sensor device with

an output driver, mainly designed for battery–operation,

hand-held equipment (such as cellular and cordless phones, and

PDA’s) The total operation power is down to 15uW in the

2.75V supply.

The south pole of sufficient strength will turn the output on in

SIP-3L but the north pole of sufficient strength will turn the output

on in SC59 package. The output will be turned off under no

magnetic field.

While the magnetic flux density (B) is larger than operation point

(Bop), the output will be turned on (low), the output is held until

B is lower than the release point (Brp), then turned off. The

difference between AH182 and AH183 is that the former

consumes less power than that of the latter in the Hall sensor

operation.

•

Micropower operation

2.5V to 5.5V battery operation

Offset Canceling Technology

Superior temperature stability

Extremely Low Switch-Point Drift

Insensitive to Physical Stress

-40°C to 85°C operating temperature

Lead Free packages: SIP-3L and SC59 (Commonly

known as SOT23 in Asia)

SIP-3L and SC59: Available in “Green” Molding

Compound (No Br, Sb)

Lead Free Finish / RoHS Compliant (Note 1)

•

Applications

•

Cover detector

Speed measurement

Home safety

Typical Circuit *

2.5~5.5V

R_L

Output

AH182/AH183

Gnd

* C is for power stabilization and to strengthen the noise immunity, the recommended capacitance is 10nF~100nF.

is the pull-up resistor, the recommended resistance is 10Kohm~100Kohm.

AH182/AH183 Rev. 8

DS31024

1 of 10

www.diodes.com

NOVEMBER 2009

12 3 4 5 6 7...10

下载PDF

与AH183-WL-7相关器件

型号	品牌	描述	获取价格	数据表
AH183-WLA	DIODES	LOW POWER HALL EFFECT SWITCH	获取价格
AH183-WL-A	DIODES	Hall Effect Sensor, 1mT Min, 6mT Max, 0.10-0.30V, Plastic/epoxy, Rectangular, 3 Pin, Surfa	获取价格
AH183-WL-B	DIODES	Hall Effect Sensor, 1mT Min, 6mT Max, 0.10-0.30V, Rectangular, Surface Mount, ROHS COMPLIA	获取价格
AH1860	PANASONIC	Snap Acting/Limit Switch, SPDT, Momentary, 2A, 30VDC, 0.75mm, Solder Terminal, Pin Plunger	获取价格
AH186061	PANASONIC	Snap Acting/Limit Switch, SPDT, Momentary, 0.1A, 30VDC, 0.75mm, Solder Terminal, Pin Plung	获取价格
AH1862	PANASONIC	Snap Acting/Limit Switch, SPDT, Momentary, 2.65mm, Solder Terminal, Hinge Lever Actuator,	获取价格