AFBR-775BxxxZ / AFBR-785BxxxZ
Twelve-Channel Transmitter and Receiver
Pluggable, Parallel-Fiber-Optics Modules
Data Sheet
Description
Features
The AFBR-775BxxxZ Twelve-Channel, Pluggable, Parallel- • High Channel Capacity: 60 Gbps per module
Fiber-Optics Transmitter and AFBR-785BxxxZ Twelve-
Channel, Pluggable, Parallel-Fiber-Optics Receiver are
high performance fiber optics modules for short-range
parallel multi-lane data communication and interconnect
• High port density: 19 mm lateral port pitch; < 0.51 mm/
Gbps for Tx–Rx pair
• Low power consumption per Gbps: < 53 mW/Gb/s for
Tx–Rx pair
applications. The modules operate at 5.0Gbps per channel
over multimode fiber systems using a nominal wave- • Based on industry-standard, pluggable, SNAP12 form
length of 850 nm. Aggregate bandwidth per transmitter-
receiver link is 60G. The electrical interface uses a 10x10
MEG-Array® low-profile mezzanine connector. The optical
interface uses a MTP® (MPO) 1x12 ribbon cable connector.
The thermal interface can be a factory installed heatsink
for air-cooled systems or thermal seating plane for user
flexibility. The modules incorporate high performance,
factor with upgraded pinout for improved signal
integrity and keyed to prevent mis-plugging with first
generation SNAP12 devices
• Backed by PPOD MSA to enable multiple sources of
supply
• Twelve independent channels per module
highly reliable, short wavelength optical devices coupled • Separate transmitter and receiver modules
with proven circuit technology to provide long life and
consistent service.
• 850 nm VCSEL array in transmitter; PIN array in receiver
• Operates up to 5.0 Gbps with 8b/10b compatible coded
data
Applications
• Links up to 150 m at 5.0 Gbps with 2000 MHz∙km 50 um
• High Performance and High Productivity computer
MMF
interconnects
• Two power supplies, 2.5 V and 3.3 V, for low power
• InfiniBand 12X DDR SX interconnects
consumption
• Datacom switch and router backplane connections
• Telecom switch and router backplane connections
• Dense 4 Gbps Fibre Channel compatible architectures
• Dedicated signals for module address, module reset
and host interrupt.
• TwoWire Serial (TWS) interface with maskable interrupt
• Reach extensions for various protocols including PCI
for expanded functionality including:
Express, HyperTransport and Serial RapidIO
o Individual channel functions: disable, squelch
disable, lane polarity inversion, margin
Part Number Ordering Options
Transmitter Part Numbers
o Programmable equalization integrated with DC
blocking caps at transmitter data input
With fin heat sink / no EMI nose clip
With fin heat sink / EMI nose clip
With pin heat sink / no EMI nose clip
With pin heat sink / EMI nose clip
With no heat sink / no EMI nose clip
With no heat sink / with EMI nose clip
AFBR-775BZ
AFBR-775BEZ
AFBR-775BPZ
AFBR-775BEPZ
AFBR-775BHZ
AFBR-775BEHZ
o Programmable receiver output swing and de-
emphasis level
o A/D readback: module temperature and supply
voltages, per channel laser current and laser power,
or received power
Receiver Part Numbers
o Status: per channel Tx fault, electrical (transmitter)
or optical (receiver) LOS, and alarm flags
With fin heat sink / no EMI nose clip
With fin heat sink / EMI nose clip
With pin heat sink / no EMI nose clip
With pin heat sink / EMI nose clip
With no heat sink / no EMI nose clip
With no heat sink / with EMI nose clip
AFBR-785BZ
AFBR-785BEZ
AFBR-785BPZ
AFBR-785BEPZ
AFBR-785BHZ
AFBR-785BEHZ
• 0 to 80 °C case temperature operating range
Patent - www.avagotech.com/patents