Data Sheet
ADXL358
Low Noise, Low Drift, Low Power, 3-Axis MEMS Accelerometer
FEATURES
FUNCTIONAL BLOCK DIAGRAM
► 0 g offset vs. temperature (all axes): ±0.2 mg/°C typical
► Ultralow noise spectral density (all axes): 80 µg/√Hz
► Low power, VSUPPLY (LDO regulator enabled)
► In measurement mode: 150 µA
► In standby mode: 21 µA
► User adjustable analog output bandwidth
► Integrated temperature sensor
► Voltage range options
► VSUPPLY with internal regulators: 2.25 V to 3.6 V
► V1P8ANA, V1P8DIG with internal LDO regulator bypassed: 1.8 V
typical ± 10%
Figure 1. Functional Block Diagram
► Operating temperature range: −40°C to +125°C
► 14-terminal, 4 mm × 4 mm × 1.04 mm, LGA package
APPLICATIONS
► Inertial measurement units (IMUs)/attitude and heading refer-
ence systems (AHRSs)
► Platform stabilization systems
► Structural health monitoring
► Seismic imaging
► Tilt sensing
► Robotics
► Condition monitoring
GENERAL DESCRIPTION
The analog output ADXL3581 is a low noise density, low 0 g offset
drift, low power, 3-axis accelerometer with selectable measurement
ranges. The ADXL358B supports the ±10 g and ±20 g ranges, and
the ADXL358C supports the ±10 g and ±40 g ranges.
The ADXL358 offers industry leading noise, minimal offset drift over
temperature, and long-term stability, enabling precision applications
with minimal calibration.
The low noise of the ADXL358 over higher frequencies is ideal
for condition-based monitoring and other vibration sensing applica-
tions.
1
Protected by U.S. Patents 8,472,270; 9,041,462; 8,665,627; 8,917,099; 6,892,576; 9,297,825; and 7,956,621.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to
change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
DOCUMENT FEEDBACK
TECHNICAL SUPPORT