Datasheet > ADT7350

ADT7350

更新时间： 2022-10-09 10:38:19

品牌	Logo	应用领域
ADTECH		转换器开关
页数	文件大小	规格书
9页	333K
描述
a step-down converter with integrated switching MOSFET

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

ADT7350 数据手册

ADT7350

DETAILED DESCRIPTION

Architecture and Operation

The ADT7350 is a current mode step-down converter uses a PWM control and integrated Power

Switch. An internal error amplifier establishes an integrated error voltage which is compared

with slope compensated ramp signal in order to make internal Power Switch control signal. The

ADT7350 has not only voltage feedback loop but also current feed-forward loop. The peak

current detector limit the over current in cycle by cycle basis and gives the information of load

current to the PWM controller.

At the starting of a cycle, Power Switch is off , the input and output is isolated. The fixed

frequency generator start to operate. After oscillator working , every cycle of beginning, the

Power Switch is turned on. The current flows into inductor thus input is shorted to output via to

inductor.

The Power Switch is turned off when ;

1) The ramp signal which is the sum of the current sensing amplifier output and artificial

compensated signal to prevent from sub-harmonic oscillation crosses the output of

integrator .

2) The inductor current reaches the maximum allowed level (1.8A)

3) The protection signals are trigged.

When the Power Switch is off , the inductor current can not change abruptly. The external

Schottky diode conducts the inductor current.

Enable(EN)

The ADT7350 features a low-power shut down mode to decrease total current consumption. A

logic Low at EN shuts down the controller and internal Power Switch. The typical value of VIH

is 1.2V , VIL is 0.4.

Soft-Start

The internal soft-start circuitry make a reference voltage of error amplifier gradually ramps up to

reduce input surge current during start-up.

Bootstrap

In order to generate enough large control voltage of Power Switch. The purpose of this block is to

decrease Power Switch turn on resistance.

Protection (OVP/OTP/OCP)

The ADT7350 monitors the output voltage of controller and limit the maximum allowed

feedback voltage in order not to abruptly change output voltage. The output feed-back voltage

over 0.95V, this function is trigged. The ADT7350 monitors the temperature variation using

PTAT(Proportional to Absolute Temperature) current. When the die temperature exceeds typical

+140 °C , the Over temperature function is trigged. The maximum allowed inductor current is

well controlled to prevent from falling into over-load or shorted output conditions. The

maximum allowed load current is typically 1.8A.

* This specifications are subject to be changed without notice

http://www.ad-tech.co.kr

Sep. 9. 2010 / Rev. 0.0

7/9

1...4 5 678 9

下载PDF

与ADT7350相关器件

型号	品牌	描述	获取价格	数据表
ADT7350_12	ADTECH	Step-down converter with integrated switching MOSFET	获取价格
ADT7351	ADTECH	step-down converter with integrated switching MOSFET	获取价格
ADT7408	ADI	+-2 C Accurate, 12-Bit Digital Temperature Sensor	获取价格
ADT7408CCPZ-R2	ADI	+-2 C Accurate, 12-Bit Digital Temperature Sensor	获取价格
ADT7408CCPZ-REEL	ADI	+-2 C Accurate, 12-Bit Digital Temperature Sensor	获取价格
ADT7408CCPZ-REEL	ROCHESTER	DIGITAL TEMP SENSOR-SERIAL, 12BIT(s), 2Cel, RECTANGULAR, SURFACE MOUNT, LEAD FREE, LFCSP-8	获取价格