Precision Wide Range (3 nA to 3 mA)
High-Side Current Mirror
ADL5315
FEATURES
FUNCTIONAL BLOCK DIAGRAM
Accurately mirrors input current (1:1 ratio) over 6 decades
Linearity 1% from 3 nA to 3 mA
ADL5315
VOLTAGE
REFERENCE
CURRENT
LIMITING
Stable mirror input voltage
Voltage held 1 V below supply using internal reference
or can be set externally
Adjustable input current limit
2.7 V to 8 V single-supply operation
Miniature 8-lead LFCSP (2 mm × 3 mm)
4
3
5
6
COMM
RLIM
20kΩ
CURRENT
MIRROR
1:1
SREF
VSET
VPOS
NC
2
1
7
8
APPLICATIONS
IOUT
I
PD
INPT
Optical power monitoring from a single photodiode
General voltage biasing with precision current monitoring
Voltage-to-current conversion
I
PD
Figure 1.
GENERAL DESCRIPTION
The ADL5315 is a wide input current range, precision high-side
current mirror featuring a stable and user-adjustable input
voltage. It is optimized for use with PIN photodiodes, but its
flexibility and wide operating range make it suitable for a broad
array of additional applications. Over the 3 nA to 3 mA range,
the current sourced from the INPT pin is accurately mirrored
with a 1:1 ratio and sourced from the IOUT output pin. In a
typical photodiode application, the output drives a current-
input logarithmic amplifier to produce a linear-in-dB output
representing the optical power incident upon the photodiode.
For linear voltage output, a single resistor to ground is all that is
required. The photodiode anode can be connected to a high
speed transimpedance amplifier for the extraction of the data
stream. The voltage at the INPT pin is temperature stable with
respect to the voltage at the VSET input pin, which it tracks. A
temperature stable reference voltage is provided at the SREF
pin, which, when tied to VSET, fixes the voltage at INPT 1.0 V
below VPOS. VSET can also be driven from an external source.
The VSET input has very low input current and can be driven
as low as the bottom rail, facilitating nonloading voltage-to-
current conversion as well as minimizing dark current in
photodiode applications.
The ADL5315 also features adjustable input current limiting
using an external resistor from RLIM to VPOS. The maximum
current sourced by INPT (and IOUT) can be set between 1 mA
and 16 mA, beyond which the voltage at INPT falls rapidly
from its setpoint. Connecting RLIM directly to VPOS provides
basic input short-circuit protection with the default current
limit of 16 mA typical.
The ADL5315 is available in a 2 mm × 3 mm, 8-lead LFCSP and
is specified for operation from −40°C to +85°C.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
© 2005 Analog Devices, Inc. All rights reserved.
5秒后页面跳转
STM32F030C6芯片介绍：主要参数分析、引脚配置说明、功耗及封装
PCF8591数据手册解读：参数、引脚说明
一文带你了解ss8050参数、引脚配置、应用指南
深入解析AD7606高性能多通道模数转换器：资料手册参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
