DJ (ADJ)
RATING
1. Coil data
1) Single side stable
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Max. applied voltage
(at 20°C 68°F)
Nominal coil voltage
Nominal operating power
250mW
5V DC
6V DC
100Ω
144Ω
576Ω
2,304Ω
9,216Ω
75%V or less of nominal
voltage (Initial)
10%V or more of nominal
voltage (Initial)
12V DC
24V DC
48V DC
130%V of nominal voltage
2) 1 coil latching
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Max. applied voltage
(at 20°C 68°F)
Nominal coil voltage
Nominal operating power
150mW
5V DC
6V DC
167Ω
240Ω
960Ω
3,840Ω
15,360Ω
70%V or less of nominal
voltage (Initial)
70%V or less of nominal
voltage (Initial)
12V DC
24V DC
48V DC
130%V of nominal voltage
3) 2 coil latching
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Max. applied voltage
(at 20°C 68°F)
Nominal coil voltage
Nominal operating power
250mW
5V DC
6V DC
100Ω
144Ω
576Ω
2,304Ω
9,216Ω
70%V or less of nominal
voltage (Initial)
70%V or less of nominal
voltage (Initial)
12V DC
24V DC
48V DC
130%V of nominal voltage
2. Specifications
Characteristics
Item
Specifications
Arrangement
1 Form C, 1 Form A, 1 Form B, 1 Form A 1 Form B, 2 Form C, 2 Form A, 2 Form B
Contact resistance (Initial)
Max. 100 mΩ (By voltage drop 6 V DC 1A)
AgSnO2 type (1 Form C, 1 Form A, 1 Form B),
Au-flashed AgSnO2 type (1 Form A 1 Form B, 2 Form C, 2 Form A, 2 Form B)
Contact
Rating
Contact material
16 A 250V AC (1 Form C, 1 Form A, 1 Form B),
10 A 250V AC (2 Form C, 2 Form A, 2 Form B, 1 Form A 1 Form B)
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
4,000 V A
250V AC
16 A (1 Form C, 1 Form A, 1 Form B),
10 A (1 Form A 1 Form B, 2 Form C, 2 Form A, 2 Form B)
Max. switching current
Nominal operating power
Min. switching capacity (Reference value)*1
150mW (1 coil latching), 250mW (Single side stable, 2 coil latching)
100mA 5 V DC
Insulation resistance (Initial)
Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section.
1,000 Vrms for 1min. (Detection current: 10mA.)
Between open contacts
Between contact and coil
Breakdown voltage
(Initial)
4,000 Vrms for 1min. (Detection current: 10mA.)
Electrical
characteristics
Surge breakdown
voltage*2 (Initial)
Between contact and coil
Min. 10,000 V
Temperature rise (coil) (at 70°C 158°F)
Operate time [Set time] (at 20°C 68°F)
Release time [Reset time] (at 20°C 68°F)
Max. 55°C (By resistive method, nominal voltage applied to the coil, max. switching current.)
Max. 20 ms [20 ms] (Nominal voltage applied to the coil, excluding contact bounce time.)
Max. 20 ms [20 ms] (Nominal voltage applied to the coil, excluding contact bounce time.)
Min. 200 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
Functional
Shock resistance
Destructive
Mechanical
characteristics
Functional
Vibration resistance
Destructive
10 to 55 Hz at double amplitude of 2 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 3 mm
Mechanical
Min. 5×106 (at 180 times/min.)
Min. 105 (at 16A 250V AC): 1 Form C, 1 Form A, 1 Form B
Min. 105 (at 10A 250V AC): 2 Form C, 2 Form A, 2 Form B, 1 Form A 1 Form B
Expected life
Electrical (Resistive load)*3 (at 20 times/min.)
Ambient temperature: –40°C to +70°C –40°F to +158°F
Conditions
Unit weight
Conditions for operation, transport and storage*4
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Approx. 14 g .49 oz
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of 1.2×50µs according to JEC-212-1981
*3. In order to obtain the full rated life cycles, the relay should be properly vented by removing the vent nib. More detail, please look at caution for NOTES.
*4. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
ASCTB176E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/