Product
Overview
Online
Documentation
Design
Resources
Sample
& Buy
Discussion
ADA4571
Data Sheet
Parameter
Symbol
Test Conditions/Comments
Min
Typ
Max
Unit
Power Supply Rejection3
PSRR
Measured as output variation from VDD/2,
VDD = 2.7 V to 5.5 V, RL = 200 kΩ to GND,
GC = GND or VDD
80
dB
Output Short-Circuit Current
ISC
Short to GND per pin (VSIN, VCOS)
Short to VDD per pin (VSIN, VCOS)
α1 = 0°, α2 = 135°, TA = 25°C
15
−15
20
−18
52
mA
mA
mV/°
Sensitivity
SEN
POWER SUPPLY
Supply Voltage
Quiescent Supply Current
VDD
ISY
2.7
3.5
5.5
6.5
7
15
150
V
PD = GND, GC = GND, no load
PD = GND, GC = VDD, no load
PD = VDD, no load
To 98% of desired output level after VDD was
reached
4.5
mA
mA
µA
µs
Power-Up Time
tPWRUP
To 98% of desired output level after PD cycling
100
30
µs
DIGITAL INPUTS
Input Bias Current (GC)
IB_GC
IB_PD
For GC mode control pin, GC = GND
For GC mode control pin, GC = VDD
For PD pin, PD = GND
µA
µA
µA
µA
3
3
Input Bias Current (PD)
For PD pin, PD = VDD
30
Input Voltage (GC and PD)
High
Low
VIH
VIL
1.4
V
V
0.35
TEMPERATURE SENSOR
Error Over Temperature
Temperature Voltage Range
Temperature Coefficient
VTEMP Output Voltage
VTEMP Output Impedance
VTEMP Load Capacitance
VTEMP Short-Circuit Current
LOAD CAPACITOR
TERR
TRANGE
TCO
5
°C
TA = −40°C to +150°C
0
82
40
22
% VDD
mV/V/°C
% VDD
Ω
nF
mA
3.173
50
TA = 25°C
Buffered output
Optional load capacitance
Short-circuit to VDD or GND
18
0
2
ISC_VTEMP
CL
External Load Capacitance
Between VSIN to GND and VCOS to GND;
solder close to package
10
nF
1 αUNCORR is the total mechanical angular error after arctan computation. This parameter is 100% production tested at 25°C and 150°C. This error includes all sources of
error over temperature before calibration. Error components such as offset, amplitude synchronism, amplitude synchronism drift, thermal offset drift, phase error,
hysteresis, orthogonality error, and noise are included.
2 αCAL is the total mechanical angular error after arctan computation. This error includes all sources of error over temperature after an initial offset (nulling) is performed
at TA = 25°C. Error components such as amplitude synchronism drift, amplifier gain matching, thermal offset drift, phase error, hysteresis, orthogonality error, and
noise are included.
3 Guaranteed through characterization.
4 αDYNAMIC is the total mechanical angular error after arctan computation. This parameter is 100% production tested. This error includes all sources of error over
temperature after a continuous background calibration is performed to correct offset and amplitude synchronism errors. Error components such as phase error,
hysteresis, orthogonality error, noise, and lifetime drift are included.
5 Peak-to-peak amplitude mismatch. k = 100 × VSIN/VCOS.
6 Rotation frequency dependent phase error, after offset correction, amplitude calibration, and arctan calculation.
Rev. 0 | Page 4 of 21