Data Sheet
AD9914
GENERAL DESCRIPTION
The AD9914 is a direct digital synthesizer (DDS) featuring a
12-bit DAC. The AD9914 uses advanced DDS technology,
coupled with an internal high speed, high performance DAC
to form a digitally programmable, complete high frequency
synthesizer capable of generating a frequency-agile analog
output sinusoidal waveform at up to 1.4 GHz. The AD9914
enables fast frequency hopping and fine tuning resolution
(64-bit capable using programmable modulus mode). The
AD9914 also offers fast phase and amplitude hopping capability.
The frequency tuning and control words are loaded into the
AD9914 via a serial or parallel I/O port. The AD9914 also
supports a user defined linear sweep mode of operation for
generating linear swept waveforms of frequency, phase, or
amplitude. A high speed, 32-bit parallel data input port is
included, enabling high data rates for polar modulation
schemes and fast reprogramming of the phase, frequency,
and amplitude tuning words.
The AD9914 is specified to operate over the extended industrial
temperature range (see the Absolute Maximum Ratings section).
AD9914
OUTPUT
DDS
SHIFT
OSK
DAC_RSET
KEYING
AMPLITUDE (A)
PHASE (θ)
2
Acos (ωt + θ)
Asin (ωt + θ)
A
DRCTL
DRHOLD
DIGITAL
RAMP
GENERATOR
AOUT
AOUT
DAC
12-BIT
DATA
ROUTE
θ
FREQUENCY (ω)
DROVER
AND
ω
PARTITION
CONTROL
CLOCK
3
INTERNAL
PROGRAMMING
REGISTERS
PS[2:0]
SYSCLK
I/O_UPDATE
REF_CLK
REF_CLK
INTERNAL CLOCK TIMING
AND CONTROL
32
4
PLL
D0 TO D31
POWER-
DOWN
CONTROL
F0 TO F3
MULTICHIP
SYNCHRONIZATION
SYNC_CLK
Figure 2. Detailed Block Diagram
Rev. C | Page 3 of 48