10-Bit, 12-Channel Decimating
LCD DECDRIVER® with Level Shifters
AD8385
FEATURES
FUNCTIONAL BLOCK DIAGRAM
High voltage drive to within 1.3 V of supply rails
Output short-circuit protection
High update rates
Fast, 100 Ms/s 10-bit input data update rate
Static power dissipation: 1.84 W
Voltage controlled video reference (brightness), offset,
and full-scale (contrast) output levels
INV bit reverses polarity of video signal
3.3 V logic, 9 V to 18 V analog supplies
Level shifters for panel timing signals
High accuracy voltage outputs
BYP
BIAS
VRH
VRH
VRL
SCALING
CONTROL
3
VID0
VID1
VID2
VID3
VID4
VID5
VID6
VID7
VID8
VID9
VID10
VID11
/
12
2-STAGE
LATCH
10
DACs
DB(0:9)
/
/
R/L
CLK
STSQ
XFR
4
/
SEQUENCE
CONTROL
INV
CONTROL
INV
V1
V2
TSTM
Laser trimming eliminates the need for adjustments or
calibration
Flexible logic
SDI
SCL
SEN
12-BIT
SHIFT
REGISTER
VAO1
VAO2
3
3
DUAL
DAC
/
/
SVRH
SVRL
SVRL
STSQ/XFR allow parallel AD8385 operation
Fast settling into capacitive loads
30 ns settling time to 0.25% into 150 pF load
Slew rate 460 V/µs
DYIN
DXIN
DY
DX
DIRYIN
DIRXIN
NRGIN
ENBX1I
ENBX2I
ENBX3I
ENBX4I
DIRY
DIRX
NRG
ENBX1
ENBX2
ENBX3
ENBX4
9
9
/
/
/
Available in 100-lead 14 mm × 14 mm TQFP E-pad
GENERAL DESCRIPTION
2
2
CLX
CLY
/
/
The AD8385 provides a fast, 10-bit, latched decimating digital
input that drives 12 high voltage outputs. 10-bit input words are
loaded into 12 separate high speed, bipolar DACs sequentially.
Flexible digital input format allows several AD8385s to be used
in parallel in high resolution displays. The output signal can be
adjusted for dc reference, signal inversion, and contrast for
maximum flexibility. Integrated level shifters convert timing
signals from a 3 V timing controller to high voltage for LCD
panel timing inputs. Two, serial, 8-bit DACs are integrated to
provide dc reference signals. A 3-wire serial interface controls
overload protection, output mode, and the serial DACs.
2
CLXIN
CLYIN
CLXN
CLYN
R
S
MONITI
MONITO
AD8385
Figure 1.
The AD8385 is fabricated on ADI’s fast bipolar, 26 V XFHV
process, which provides fast input logic, bipolar DACs with
trimmed accuracy and fast settling, high voltage, precision drive
amplifiers on the same chip.
The AD8385 dissipates 1.84 W nominal static power.
The AD8385 is offered in a 100-lead, 14 mm × 14 mm TQFP
E-pad package and operates over the commercial temperature
range of 0°C to 85°C.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.326.8703
www.analog.com
© 2005 Analog Devices, Inc. All rights reserved.