Data Sheet
AD8057/AD8058
ABSOLUTE MAXIMUM RATINGS
Table 3.
MAXIMUM POWER DISSIPATION
The maximum power that can be safely dissipated by the
AD8057/AD8058 is limited by the associated rise in junction
temperature. Exceeding a junction temperature of 175°C for
an extended period can result in device failure. Although the
AD8057/AD8058 is internally short-circuit protected, this may
not be sufficient to guarantee that the maximum junction temper-
ature (150°C) is not exceeded under all conditions. To ensure
proper operation, it is necessary to observe the maximum power
derating curves.
Parameter
Rating
Supply Voltage (+VS to –VS)
Internal Power Dissipation1
SOIC Package (R)
SOT-23-5 Package (RT)
MSOP Package (RM)
Input Voltage (Common Mode)
Differential Input Voltage
Output Short-Circuit Duration
12.6 V
0.8 W
0.5 W
0.6 W
VS
4.0 V
Observe power
derating curves
2.0
T
= 150°C
J
Storage Temperature Range (R)
−65°C to +125°C
Operating Temperature Range (A Grade) −40°C to +85°C
1.5
1.0
0.5
0
Lead Temperature (Soldering 10sec)
300°C
8-LEAD SOIC
8-LEAD MSOP
1 Specification is for device in free air:
8-lead SOIC package: θJA = 160°C/W
5-lead SOT-23-5 package: θJA = 240°C/W
8-Lead MSOP package: θJA = 200°C/W
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
SOT-23-5
–50 –40 –30 –20 –10
0
10 20 30 40 50 60 70 80 90
AMBIENT TEMPERATURE (°C)
Figure 5. Maximum Power Dissipation vs. Ambient Temperature
ESD CAUTION
Rev. E | Page 5 of 16