5秒后页面跳转
AD586A PDF预览

AD586A

更新时间: 2024-02-14 23:45:58
品牌 Logo 应用领域
亚德诺 - ADI /
页数 文件大小 规格书
8页 205K
描述
High Precision 5 V Reference

AD586A 技术参数

Source Url Status Check Date:2013-05-01 14:56:14.873是否无铅: 含铅
是否Rohs认证: 不符合生命周期:Active
零件包装代码:DIP包装说明:DIP, DIP8,.3
针数:8Reach Compliance Code:not_compliant
ECCN代码:EAR99HTS代码:8542.39.00.01
风险等级:5.35模拟集成电路 - 其他类型:THREE TERMINAL VOLTAGE REFERENCE
JESD-30 代码:R-GDIP-T8JESD-609代码:e0
功能数量:1输出次数:1
端子数量:8最高工作温度:125 °C
最低工作温度:-55 °C最大输出电压:5.0025 V
最小输出电压:4.9975 V标称输出电压:5 V
封装主体材料:CERAMIC, GLASS-SEALED封装代码:DIP
封装等效代码:DIP8,.3封装形状:RECTANGULAR
封装形式:IN-LINE峰值回流温度(摄氏度):NOT APPLICABLE
认证状态:Not Qualified座面最大高度:5.08 mm
子类别:Voltage References最大供电电流 (Isup):3 mA
最大供电电压 (Vsup):36 V最小供电电压 (Vsup):10.8 V
标称供电电压 (Vsup):15 V表面贴装:NO
技术:BIPOLAR最大电压温度系数:10 ppm/ °C
温度等级:MILITARY端子面层:Tin/Lead (Sn63Pb37)
端子形式:THROUGH-HOLE端子节距:2.54 mm
端子位置:DUAL处于峰值回流温度下的最长时间:NOT APPLICABLE
微调/可调输出:YES最大电压容差:0.05%
宽度:7.62 mmBase Number Matches:1

AD586A 数据手册

 浏览型号AD586A的Datasheet PDF文件第2页浏览型号AD586A的Datasheet PDF文件第3页浏览型号AD586A的Datasheet PDF文件第4页浏览型号AD586A的Datasheet PDF文件第5页浏览型号AD586A的Datasheet PDF文件第6页浏览型号AD586A的Datasheet PDF文件第8页 
AD586  
NEGATIVE REFERENCE VO LTAGE FRO M AN AD 586  
T he AD586 can be used to provide a precision –5.000 V output  
as shown in Figure 11. T he VIN pin is tied to at least a +6 V  
supply, the output pin is grounded, and the AD586 ground pin  
is connected through a resistor, RS, to a –15 V supply. T he –5 V  
output is now taken from the ground pin (Pin 4) instead of  
VOUT . It is essential to arrange the output load and the supply  
resistor RS so that the net current through the AD586 is be-  
tween 2.5 mA and 10.0 mA. T he temperature characteristics  
and long-term stability of the device will be essentially the same  
as that of a unit used in the standard +5 V output configuration.  
Figure 13. AD586 as a 5 V Reference for a CMOS  
Dual DAC  
STACKED P RECISIO N REFERENCES FO R  
MULTIP LE VO LTAGES  
Often, a design requires several reference voltages. T hree  
AD586s can be stacked, as shown in Figure 14, to produce  
+5.000 V, +10.000 V, and +15.000 V outputs. T his scheme  
can be extended to any number of AD586s as long as the  
maximum load current is not exceeded. T his design pro-  
vides the additional advantage of improved line regulation  
on the +5.0 V output. Changes in VIN of +18 V to +50 V  
produces an output change that is below the noise level of  
the references.  
Figure 11. AD586 as a Negative 5 V Reference  
USING TH E AD 586 WITH CO NVERTERS  
T he AD586 is an ideal reference for a wide variety of 8-, 12-,  
14- and 16-bit A/D and D/A converters. Several representative  
examples follow.  
5 V REFERENCE WITH MULTIP LYING CMO S D /A O R  
A/D CO NVERTERS  
T he AD586 is ideal for applications with 10- and 12-bit multi-  
plying CMOS D/A converters. In the standard hookup, as  
shown in Figure 12, the AD586 is paired with the AD7545  
12-bit multiplying DAC and the AD711 high-speed BiFET Op  
Amp. T he amplifier DAC configuration produces a unipolar  
0 V to –5 V output range. Bipolar output applications and other  
operating details can be found on the individual product data  
sheets.  
Figure 14. Multiple AD586s Stacked for Precision 5 V,  
10 V and 15 V Outputs  
Figure 12. Low-Power 12-Bit CMOS DAC Application  
T he AD586 can also be used as a precision reference for mul-  
tiple DACs. Figure 13 shows the AD586, the AD7628 dual  
DAC and the AD712 dual op amp hooked up for single supply  
operation to produce 0 V to –5 V outputs. Because both DACs  
are on the same die and share a common reference and output  
op amps, the DAC outputs will exhibit similar gain T Cs.  
REV. C  
–7–  

与AD586A相关器件

型号 品牌 描述 获取价格 数据表
AD586AR ADI High Precision 5 V Reference

获取价格

AD586AR-REEL ADI High Precision 5 V Reference

获取价格

AD586ARZ ADI High Precision 5 V Reference

获取价格

AD586ARZ1 ADI High Precision 5 V Reference

获取价格

AD586ARZ-REEL ADI 暂无描述

获取价格

AD586ARZ-REEL1 ADI High Precision 5 V Reference

获取价格