5秒后页面跳转
ACST210-8B PDF预览

ACST210-8B

更新时间: 2024-01-29 04:08:47
品牌 Logo 应用领域
意法半导体 - STMICROELECTRONICS 栅极触发装置开关三端双向交流开关
页数 文件大小 规格书
13页 170K
描述
Overvoltage protected AC switch

ACST210-8B 技术参数

是否Rohs认证: 符合生命周期:Active
包装说明:,Reach Compliance Code:not_compliant
ECCN代码:EAR99Factory Lead Time:13 weeks
风险等级:2.25Is Samacsys:N
关态电压最小值的临界上升速率:500 V/us最大直流栅极触发电流:10 mA
最大直流栅极触发电压:1.1 V最大维持电流:10 mA
JESD-609代码:e3最大漏电流:0.5 mA
最高工作温度:150 °C最低工作温度:-40 °C
峰值回流温度(摄氏度):NOT SPECIFIED最大均方根通态电流:2 A
断态重复峰值电压:800 V子类别:TRIACs
表面贴装:NO端子面层:Matte Tin (Sn) - annealed
处于峰值回流温度下的最长时间:NOT SPECIFIED触发设备类型:SNUBBERLESS TRIAC
Base Number Matches:1

ACST210-8B 数据手册

 浏览型号ACST210-8B的Datasheet PDF文件第4页浏览型号ACST210-8B的Datasheet PDF文件第5页浏览型号ACST210-8B的Datasheet PDF文件第6页浏览型号ACST210-8B的Datasheet PDF文件第8页浏览型号ACST210-8B的Datasheet PDF文件第9页浏览型号ACST210-8B的Datasheet PDF文件第10页 
ACST2  
Application information  
2.2  
AC line transient voltage ruggedness  
In comparison with standard Triacs, which are not robust against surge voltage, the ACST2  
is self-protected against over-voltage, specified by the new parameter V . In addition, the  
CL  
ACST2 is a sensitive device (I = 10 ma), but provides a high noise immunity level againast  
GT  
fast transients. The ACST2 switch can safely withstand AC line transient voltages either by  
clamping the low energy spikes, such as inductive spikes at switch off, or by switching to the  
on state (for less than 10 ms) to dissipate higher energy shocks through the load. This safety  
feature works even with high turn-on current ramp up.  
The test circuit of Figure 17 represents the ACST2 application, and is used to stress the  
ACST switch according to the IEC 61000-4-5 standard conditions. With the additional effect  
of the load which is limiting the current, the ACST switch withstands the voltage spikes up to  
2 kV on top of the peak line voltage. The protection is based on an overvoltage crowbar  
technology. The ACST2 folds back safely to the on state as shown in Figure 18. The ACST2  
recovers its blocking voltage capability after the surge and the next zero current crossing.  
Such a non repetitive test can be done at least 10 times on each AC line voltage polarity.  
Figure 17. Overvoltage ruggedness test circuit for resistive and inductive loads for  
IEC 61000-4-5 standards  
R = 20 Ω, L = 10 µH, V  
= 2 kV  
PP  
Surge generator  
2kV surge  
Rgene  
Model of the load  
Filtering unit  
L
R
ACST210-8x  
AC Mains  
Rg  
Doc ID 13304 Rev 3  
7/13  

与ACST210-8B相关器件

型号 品牌 描述 获取价格 数据表
ACST210-8BTR STMICROELECTRONICS 暂无描述

获取价格

ACST210-8B-TR STMICROELECTRONICS 暂无描述

获取价格

ACST210-8FP STMICROELECTRONICS Overvoltage protected AC switch

获取价格

ACST-255-15 ZETTLER CURRENT SENSE TRANSFORMER

获取价格

ACST-256-15 ZETTLER CURRENT SENSE TRANSFORMER

获取价格

ACST-257-15 ZETTLER CURRENT SENSE TRANSFORMER

获取价格