5秒后页面跳转
ACE9020 PDF预览

ACE9020

更新时间: 2022-11-26 12:19:31
品牌 Logo 应用领域
MITEL /
页数 文件大小 规格书
7页 190K
描述
Receiver and Transmitter Interface

ACE9020 数据手册

 浏览型号ACE9020的Datasheet PDF文件第2页浏览型号ACE9020的Datasheet PDF文件第3页浏览型号ACE9020的Datasheet PDF文件第4页浏览型号ACE9020的Datasheet PDF文件第5页浏览型号ACE9020的Datasheet PDF文件第6页浏览型号ACE9020的Datasheet PDF文件第7页 
ACE9020  
Receiver and Transmitter Interface  
Supersedes February 1997 edition, DS4287 - 4.1  
DS4287 - 5.0 December 1997  
ACE9020isaVHFoscillator, up-converterandprescaler.  
It is used in an offset modulated transmit architecture where a  
UHF synthesiser makes the channel selection and a second  
synthesiser generates a fixed transmit offset.  
PD1  
PD2  
1
28  
VCC  
n.c.  
GND  
n.c.  
A VCO signal drives a buffer in ACE9020 to feed an on-  
chip prescaler and transmit up-converter. The prescaler is a  
dual two-modulus divider and drives the main synthesiser  
input of the ACE9030. The SSB up-converter suppresses the  
unwanted transmit sideband.  
The VHF oscillator is buffered to drive the auxiliary  
synthesiser input of the ACE9030 and is locked to the offset  
frequency. This frequency is modulated by varying the  
resonant frequency of the external tank circuit. Both this  
oscillator and the UHF VCO drive the up-converting mixer to  
generate the transmit signal.  
Various power saving modes for battery economy are  
included. These allow the transmit sections to be shut down  
during stand-by and the whole chip can be shut down during  
sleep mode. The circuit techniques used have been chosen to  
minimise external components and at the same time give very  
high performance.  
BIAS_REF  
VCC_TX  
TXPA+  
VCC_RX  
n.c.  
RXVCOIN  
GND_RX  
VCC_TXOSC  
TXOSC-  
TXOSC+  
GND_DIV  
RATIO_SEL  
DIV_OUT-  
DIV_OUT+  
TXPA-  
RSET_TXPA  
GND_TXOSC  
TANK+  
TANK-  
VCC_DIV  
GND_OSC  
MOD_CNTRL  
15  
14  
Note: Pin 1 is identified by moulded spot  
and by coding orientation.  
NP28  
Fig.1 Pin connections - top view  
ORDERING INFORMATION  
SSOP 28 lead package, code NP28  
ACE9020B/KG/NP1S - anti-static sticks  
ACE9020B/KG/NP1T - tape mounted  
FEATURES  
Low Power Low Voltage (3.6 to 5.0 V) Operation  
Power Down Modes  
Differential Signals to Minimise Cross-talk  
Auxiliary Oscillator with Transmit Up-converter  
Prescaler for Main Synthesiser  
Part of the ACE Integrated Cellular Phone Chipset  
Small Outline 28 pin Package  
TXOSC+  
TXOSC-  
RSET_TXPA  
TANK+  
VHF  
TXPA+  
TXPA-  
OSC  
APPLICATIONS  
TANK-  
AMPS and TACS Cellular Telephone  
Two-Way Radio Systems  
BIAS_REF  
PD1  
BIAS &  
POWER  
DOWN  
CONTROL  
PD2  
RELATED PRODUCTS  
ACE9020 is part of the following chipset:  
ACE9030 Radio Interface and Twin Synthesiser  
ACE9040 Audio Processor  
RXVCOIN  
ACE9050 System Controller and Data Modem  
RATIO_SEL  
DIV_OUT+  
DIV_OUT-  
DIVIDE BY  
64/65 OR 128/129  
MOD_CNTRL  
ABSOLUTE MAXIMUM RATINGS  
Supply voltage  
6V  
- 65°C to + 150°C  
- 30°C to + 85°C  
-0.3V to VCC +0.3V  
500V  
Storage temperature  
Operating temperature  
Voltage at any pin  
Fig. 2 ACE9020 simplified block digram  
Static Sensitivity (HBM) min  

与ACE9020相关器件

型号 品牌 描述 获取价格 数据表
ACE9020/KG/NP1S DYNEX Telecom Circuit, 1-Func, Bipolar, PDSO28,

获取价格

ACE9020/KG/NP1T DYNEX Telecom Circuit, 1-Func, PDSO28,

获取价格

ACE9020B ZARLINK Receiver and Transmitter Interface

获取价格

ACE9020B/KG/NP1S MICROSEMI Telecom Circuit, 1-Func, Bipolar, PDSO28, SSOP-28

获取价格

ACE9020B/KG/NP1S ZARLINK Telecom Circuit, 1-Func, Bipolar, PDSO28, SSOP-28

获取价格

ACE9020B/KG/NP1S ROCHESTER SPECIALTY TELECOM CIRCUIT, PDSO28, SSOP-28

获取价格