ABS1,4,5
Au-clad double layer
SPST-NO
Wire position
Right angle
ABS4638449
ABS4638549
Operating force
Max. gf
Actuator
Straight
Left angle
ABS5638449
ABS5638549
0.89 N
1.08 N
ABS1638449
ABS1638549
Leaf lever
* Agency standard: Please refer to “Ordering information”.
SPECIFICATIONS
1. Contact rating
Recommended contact material chart
classified by load voltage & current
(reference)
Au-clad contact type
AgNi alloy contact type
Voltage
Au-clad
Au-clad
triple layer
twin layer
2A
Resistive load
Inductive load
Resistive load
Silver-alloy
100mA
125 V AC
250 V AC
30 V DC
2 A
2 A
2 A
2 A
0.1 A
0.1 A
0.1 A
—
—
—
Gold-clad triple layer
Gold-clad double layer
2 A
2 A
0.1 A
—
125 V DC
0.4 A
0.05 A
1mA
0
DC
AC
5
5
15
30V
30
Low-level circuit rating (Au-clad contact type)
250V
Rated voltage
6 V DC
Resistive load
5 mA
Remarks: If the contact is being used in the constant
low-level circuit load range, the Au-clad twin
layer contact is recommended. If there is a
danger of the current being less than 0.5 A,
for instance if the contact is being turned on
and off, the Au-clad triple layer type is
recommended.
12 V DC
2 mA
24 V DC
1 mA
2. Characteristics
Leaf lever
Min. 5x105 (at 60 cpm)
Mechanical life
Other types
Min. 5x106 (at 60 cpm)
Min. 5x104 (at 20 cpm)
Min. 2x105 (at 20 cpm)
(O.T.: Specified value)
AgNi alloy contact type
Au-clad contact type
Electrical life at rated load
(O.T.: Max.)
Insulation resistance
Dielectric strength
Min. 100 MΩ (at 500 V DC insulation resistance meter)
Between non-continuous terminals
Between each terminal and other exposed metal parts
Between each terminal and ground
1,000 Vrms
1,500 Vrms
1,500 Vrms
Vibration resistance (Pin plunger type)
Shock resistance (Pin plunger type)
10 to 55 Hz at single amplitude of 0.75 mm (Contact opening Max. 1 msec.)
2
Min. 294 m/s (Contact opening Max. 1 msec.)
Dust protected type (IP50): Max. 50 mΩ
(By voltage drop 1 A 6 to 8 V DC)
AgNi alloy contact type
Contact resistance (Initial)
Immersion protected type (IP67): Max. 100 mΩ
Dust protected type (IP50): Max. 100 mΩ
Au-clad contact type
(By voltage drop 0.1 A 6 to 8 V DC)
Immersion protected type (IP67): Max. 150 mΩ
Allowable operating speed (at no load)
Max. operating cycle rate (at no load)
Ambient temperature
0.1 to 500 mm/sec.
120 cpm
–40°C to +85°C
Unit weight
Approx. 2 g (IP50 type)
IP67 (Wire leads type)
Water resistance
3. Operating characteristics
Movement
differential,
Max. mm
Operating
position,
mm
Pretravel, Max.
mm
Overtravel,
Min. mm
Type of actuator
Operating force, Max.
Release force, Min.
Pin plunger
0.98N
0.39N
0.34N
0.25N
0.34N
0.39N
0.88N
1.47N
0.59N
0.54N
0.44N
0.54N
0.59N
1.08N
0.15N
0.034N
0.029N
0.025N
0.029N
0.034N
0.17N
0.20N
0.039N
0.034N
0.029N
0.034N
0.039N
0.20N
0.6
2.5
2.8
3.5
2.8
2.5
4.5
0.1
0.5
0.8
1.0
0.8
0.5
1.0
0.4
0.8
1.2
1.6
1.2
0.8
2.5
8.4 0.3
8.8 0.8
Short hinge lever
Hinge lever
8.8 0.8
Long hinge lever
Simulated roller lever
Roller lever
8.8 1.2
11.65 0.8
14.5 0.8
14.5 1.5
Leaf lever
AECTB2E 201201-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e