DATA SHEET
AAT3242
300mA/150mA Dual CMOS LDO Linear Regulator
Pin Descriptions
Pin #
TSOPJW-12 TDFN33-12 Symbol Function
Enable Regulator A pin; this pin should not be left floating. When pulled low, the PMOS
pass transistor turns off and the device enters shutdown mode, consuming less than
1µA.
1
12
ENA
Ground connection pins. For the TDFN33 package, The exposed thermal pad (EP)
should be connected to the board ground plane and Pins 4 and 10. The ground plane
should include a large exposed copper pad under the package with vias to the bottom
layer ground plane for thermal dissipation (see package outline).
Power OK pin with open drain output. It is pulled low when the OUTA pin is below the
10% regulation window.
2, 3, 8, 9
4
4, 10
11
GND
POKA
Low current (150mA) regulator output pin; should be decoupled with a 2.2µF or greater
output low-ESR ceramic capacitor.
Input voltage pin for Regulator B; should be decoupled with 1µF or greater capacitor.
Enable Regulator B; this pin should not be left floating. When pulled low, the PMOS pass
transistor turns off and the device enters shutdown mode, consuming less than 1µA.
5
6
7
9
7
6
OUTB
INB
ENB
Power OK pin with open drain output. It is pulled low when the OUTB pin is below the
10% regulation window.
High-current (300mA) regulator output pin; should be decoupled with a 2.2µF or
greater output low-ESR ceramic capacitor.
10
11
5
3
POKB
OUTA
12
n/a
1
2, 8
INA
N/C
Input voltage pin for Regulator A; should be decoupled with 1µF or greater capacitor.
Not connected.
Pin Configuration
TSOPJW-12
(Top View)
TDFN33-12
(Top View)
1
12
11
10
9
ENA
GND
GND
POKA
OUTB
INB
INA
1
2
3
4
5
6
12
11
10
9
INA
N/C
ENA
POKA
GND
OUTB
N/C
2
3
4
5
6
OUTA
POKB
GND
GND
ENB
OUTA
GND
POKB
ENB
EP
8
8
7
7
INB
Skyworks Solutions, Inc.
• Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
202259A
• Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • August 10, 2012