AAT2830/31
800mA Total Display Solution
for Portable Devices
Pin Description
Pin #
Symbol
Function
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
EP
BL3
BL2
BL1
AGND
CT
Power return (cathode) for backlight channel 3. If not used, connect to the OUT pin.
Power return (cathode) for backlight channel 2. If not used, connect to the OUT pin.
Power return (cathode) for backlight channel 1. If not used, connect to the OUT pin.
Signal ground.
Safety flash timer control capacitor input.
2
EN/SET
R
Enable and AS Cwire serial interface control input.
Power return (cathode) for Red LED of the RGB module.
Power return (cathode) for Green LED of the RGB module.
Power return (cathode) for Blue LED of the RGB module.
Positive node of flying capacitor 2.
Negative node of flying capacitor 2.
Output voltage pin. Connect to anode of all LEDs.
Input voltage pin.
Positive node of flying capacitor 1.
Negative node of flying capacitor 1.
Power ground.
Power return (cathode) for flash channel 4. If not used, connect to the OUT pin.
Power return (cathode) for flash channel 3. If not used, connect to the OUT pin.
Power return (cathode) for flash channel 2. If not used, connect to the OUT pin.
Power return (cathode) for flash channel 1. If not used, connect to the OUT pin.
Maximum backlight current programming resistor input. Ground this pin to use default values.
Power return (cathode) for backlight channel 6. If not used, connect to the OUT pin.
Power return (cathode) for backlight channel 5. If not used, connect to the OUT pin.
Power return (cathode) for backlight channel 4. If not used, connect to the OUT pin.
Exposed pad (bottom); connect to GND directly beneath the package
G
B
C2+
C2-
OUT
IN
C1+
C1-
PGND
FL4
FL3
FL2
FL1
BSET
BL6
BL5
BL4
Pin Configuration
TQFN44-24
(Top View)
1
2
3
4
5
6
18
17
16
15
14
13
BL3
BL2
BL1
FL3
FL4
PGND
C1-
C1+
IN
AGND
CT
EN/SET
2
2830.2007.09.1.0