16-Channel Constant-Current LED Driver
A6282
ELECTRICAL CHARACTERISTICS (continued), at TA1 = 25°C, VDD = 3.0 to 5.5 V, unless otherwise noted
Characteristic
Symbol
TJTSD
Test Conditions
Temperature increasing
Min.
Typ.2
165
15
Max.
Unit
°C
Thermal Shutdown Temperature
Thermal Shutdown Hysteresis
–
–
–
–
TJTSDhys
°C
Reference Voltage at External
Resistor REXT
VEXT
REXT = 374 Ω
–
1.21
–
V
1Tested at 25°C. Specifications are assured by design and characterization over the operating temperature range of –40°C to 85°C.
2Typical data are for initial design estimations only, and assume optimum manufacturing and application conditions. Performance may vary for
individual units, within the specified maximum and minimum limits.
3Err = (IO(min or max) – IO(av)) / IO(av). IO(av) is the average current of all outputs. IO(min or max) is the output current with the greatest
difference from IO(av).
4Recommended operating range: VO = 1.0 to 3.0 V.
SWITCHING CHARACTERISTICS at TA1 = 25°C, VDD = VIH = 5.0 V, VDS = 1 V, VIL = 0 V, REXT = 910 ꢀ, IO = 21.4 mA, VL = 2 V,
RL = 51 ꢀ, CL = 15 pF (see also Timing Diagrams section)
Characteristic
Symbol
fCLK
fCLKC
twh0
twh1
tsu0
Test Conditions
Min.
Typ.2
Max.
30
25
–
Unit
MHz
MHz
ns
Clock Frequency
CLK
–
–
–
–
–
–
–
–
–
Clock Frequency (cascaded devices)
Clock Pulse Duration
CLK
–
CLK = high
LE = high
SDI to CLK↑
CLK↑ to LE↑
CLK↑ to SDI
LE↓ to CLK↑
16
20
10
10
10
10
LE Pulse Duration
–
ns
–
ns
Setup Time
Hold Time
tsu1
–
ns
th0
–
ns
th1
–
ns
tr0
tr1
SDO, 10/90% points (measurement circuit A)
OUTx, VDD = 5 V,10/90% points (measurement circuit B)
SDO, 10/90% points (measurement circuit A)
OUTx, VDD = 5 V,10/90% points (measurement circuit B)
CLK↑ to SDO↑↓ (measurement circuit A)
–
–
–
10
–
16
30
16
30
30
60
60
–
ns
ns
ns
ns
ns
ns
ns
ns
Rise Time
Fall Time
tf0
–
tf1
–
10
–
tpd0
tpd1
tpd2
tw(OE)
–
¯¯¯¯
Propagation Delay Time
OE↓ to OUTx↑↓ (measurement circuit B)
–
–
LE↑ to OUTx↑↓ (measurement circuit B)
–
–
Output Enable Pulse Duration
(see Timing Diagrams section)
60
–
1Tested at 25°C. Specifications are assured by design and characterization over the operating temperature range of –40°C to 85°C.
2Typical data are for initial design estimations only, and assume optimum manufacturing and application conditions. Performance may vary for
individual units, within the specified maximum and minimum limits.
Parameter Measurement Circuits
VL
A6282
A6282
RL
CL
SDO
OUTx
15 pF
(A) Circuit for tf0, tpd0, and tr0
(B) Circuit for tf1, tpd1, tpd2, and tr1.
Allegro MicroSystems, Inc.
115 Northeast Cutoff
6
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com