DATA SHEET
Am29SL400C
4 Megabit (512 K x 8-Bit/256 K x 16-Bit) CMOS 1.8
Volt-only Super Low Voltage Flash Memory
Distinctive Characteristics
■ Single power supply operation
■ Embedded Algorithms
— 1.65 to 2.2 V for read, program, and erase operations
— Ideal for battery-powered applications
— Embedded Erase algorithm automatically
preprograms and erases the entire chip or any
combination of designated sectors
■ Manufactured on 0.32 µm process technology
— Embedded Program algorithm automatically writes
and verifies data at specified addresses
■ High performance
— Access times as fast as 100 ns
■ Minimum 1,000,000 erase cycle guarantee per
■ Ultra low power consumption (typical values at
sector
5 MHz)
■ 20-year data retention at 125°C
— 1 µA Automatic Sleep Mode current
— 1 µA standby mode current
— 5 mA read current
■ Package option
— 48-ball FBGA
— 48-pin TSOP
— 20 mA program/erase current
■ Compatibility with JEDEC standards
■ Flexible sector architecture
— Pinout and software compatible with single-power
supply Flash
— One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and seven
64 Kbyte sectors (byte mode)
— Superior inadvertent write protection
— One 8 Kword, two 4 Kword, one 16 Kword, and seven
32 Kword sectors (word mode)
■ Data# Polling and toggle bits
— Supports full chip erase
— Provides a software method of detecting program or
erase operation completion
— Sector Protection features:
A hardware method of locking a sector to prevent any
program or erase operations within that sector
Sectors can be locked in-system or via programming
equipment
■ Ready/Busy# pin (RY/BY#)
— Provides a hardware method of detecting program or
erase cycle completion
Temporary Sector Unprotect feature allows code
changes in previously locked sectors
■ Erase Suspend/Erase Resume
— Suspends an erase operation to read data from, or
program data to, a sector that is not being erased,
then resumes the erase operation
■ Unlock Bypass Program Command
— Reduces overall programming time when issuing
multiple program command sequences
■ Hardware reset pin (RESET#)
— Hardware method to reset the device to reading array
data
■ Top or bottom boot block configurations
available
Publication# Am29SL400C_00 Rev: A
Amendment: 6 Issue Date: January 23, 2007
This Data Sheet states AMD’s current specifications regarding the Products described herein. This Data Sheet may
be revised by subsequent versions or modifications due to changes in technical specifications.