A29DL32x Series
GENERAL DESCRIPTION
A29DL32x Features
The A29DL32x family consists of 32 megabit, 3.0 volt-only
flash memory devices, organized as 2,097,152 words of 16
bits each or 4,194,304 bytes of 8 bits each. Word mode data
appears on I/O0–I/O15; byte mode data appears on I/O0–I/O7.
The device is designed to be programmed in-system with the
standard 3.0 volt VCC supply, and can also be programmed
in standard EPROM programmers.
The device offers complete compatibility with the JEDEC
single-power-supply Flash command set standard.
Commands are written to the command register using
standard microprocessor write timings. Reading data out of
the device is similar to reading from other Flash or EPROM
devices.
The device is available with an access time of 70, 80, 90, or
120 ns. The devices are offered in 48-pin TSOP and 48-ball
The host system can detect whether a program or erase
operation is complete by using the device status bits:
Fine-pitch TFBGA. Standard control pins—chip enable (
),
RY/
pin, I/O7 (
BY
Polling) and I/O6/I/O2 (toggle bits).
Data
CE
After a program or erase cycle has been completed, the
device automatically returns to reading array data.
The sector erase architecture allows memory sectors to be
erased and reprogrammed without affecting the data
contents of other sectors. The device is fully erased when
shipped from the factory.
Hardware data protection measures include a low VCC
detector that automatically inhibits write operations during
power transitions. The hardware sector protection feature
disables both program and erase operations in any
combination of the sectors of memory. This can be achieved
write enable (
), and output enable (
OE
)—control
WE
normal read and write operations, and avoid bus contention
issues.
The device requires only a single 3.0 volt power supply for
both read and write functions. Internally generated and
regulated voltages are provided for the program and erase
operations.
Simultaneous Read/Write Operations with Zero
Latency
The Simultaneous Read/Write architecture provides
in-s y s t e m or via programming equipment.
simultaneous operation by dividing the memory space into
The device offers two power-saving features. When
addresses have been stable for a specified amount of time,
the device enters the automatic sleep mode. The system
can also place the device into the standby mode. Power
consumption is greatly reduced in both modes.
two banks. The device can improve overall system
performance by allowing a host system to program or erase
in one bank, then immediately and simultaneously read from
the other bank, with zero latency. This releases the system
from waiting for the completion of program or erase
operations.
The A29DL32x devices use multiple bank architectures to
provide flexibility for different applications. Three devices are
available with these bank sizes:
Device
DL322
DL323
DL324
Bank 1
4 Mb
Bank 2
28 Mb
24 Mb
16 Mb
8 Mb
16 Mb
PRELIMINARY (May, 2005, Version 0.0)
2
AMIC Technology, Corp.
5秒后页面跳转
深入解析AD7606高性能多通道模数转换器：资料手册参数分析
74HC573三态非易失锁存器(Latch)资料手册参数分析
MAX3232 RS-232电平转换器资料手册参数分析
MAX485 RS-485/RS-422收发器资料手册参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
