61F-UHS/-HSL
Terminal bolt
SUS304
BS-1T
SUS316
Mounting Holes
Titanium
Hastelloy B
Hastelloy C
M4 nut
SUS304
Width between
flats: 20.5
Two, M4**
24 dia.
M18 P=1.5
(fine screw thread)
Hastelloy
titanium
*This nut is made of Fluorine Resin
**A connecting nut made of Hastelloy B, Hastelloy
C, or titanium is not supplied with two M4 screws
and thus has no holes for such screws.
Material
Weight
SUS304
SUS316
Titanium
Approx. 45 g
HAS B
HAS C
Approx. 55 g
Approx. 55 g
Approx. 65 g
Approx. 60 g
PH-1
PH-2
(Approx. 140 g with a 1-m cord)
(Approx. 235 g with a 1-m cord)
Two, 6-dia. holes
PVC resin (black)
Resin
26 dia. 27 dia. 5 dia.
19 dia.
Two-core
cable
Single-core
cable
Cable OD: Vinyl, Hypalon 6.8 dia.
Cable OD: Vinyl 5.0 dia., Hypalon 6.5 dia.
Note: Cable is supplied in lengths of 1, 5, 10, 15, 20, 30, 40,
50, 60, 70, 80, 90, or 100 meters.
■ Electrode Separators
F03-14 1P for one pole
F03-14 3P for three poles
F03-14 5P for five poles
Five, 7 dia.
Three, 7 dia.
6.5 dia.
20
20
28 dia.
41
46
Weight: Approx. 15 g
Weight: Approx. 30 g
Weight: Approx. 30 g
■ Safety Precautions
Refer to Safety Precautions for All Level Controllers.
Precautions for Correct Use
Short Wiring in Electrode Circuit
• Keep the wires connecting the Controller to Electrode Holders as
short as possible. If long leads are used, the floating capacity of the
leads, and abnormal surges or noise in the Electrode circuit can
cause malfunctions.
• The thicker the cables, the shorter the permitted wiring length. The
length of the cable connecting the Controller and Electrode is
specified in the Controller datasheet as a guideline assuming that a
600-V VCT 0.75-mm2, 3-core cabtire cable is used. Test results
indicate that the actual wiring length using VCT 3.5-mm2, 3-core
cable laid over the ground is 50% of the specified length for
general-purpose applications and 80% of the specified length for
long-distance applications. When selecting cable specifications,
remember that the wiring length is further decreased for
underground cables and larger diameter cables because of the
increased floating capacity with the ground.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
6