PRELIMINARY
VTM
V048K120T025
TM
V•I Chip – VTM
K indicates BGA configuration. For other
mounting options see Part Numbering below.
Voltage Transformation Module
• 48 V to 12 V V•I Chip Converter
• 125°C operation
• 25 A (37.5 A for 1 ms)
• 1 µs transient response
• 3.5 million hours MTBF
• Typical efficiency 96%
• No output filtering required
©
• High density – 1200 W/in3
• Small footprint – 280 W/in2
• Low weight – 0.5 oz (14 g)
• Pick & Place / SMD
Vf = 26 - 55 V
VOUT = 6.5 - 13.7 V
IOUT = 25 A
K = 1/4
ROUT = 13.9 mΩ max
• Surface mount BGA or J-Lead
packages
Actual size
Product Description
Absolute Maximum Ratings
Parameter
Values
-1.0 to 60
100
Unit
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
A
Notes
The V048K120T025 V•I Chip Voltage Transformation
Module (VTM) breaks records for speed, density and
efficiency to meet the demands of advanced DSP, FPGA,
and ASIC at the point of load (POL) while providing
isolation from input to output. It achieves a response
time of less than 1 µs and delivers up to 25 A in a
volume of less than 0.25 in3 with unprecedented
efficiency. It may be paralleled to deliver hundreds of
amps at an output voltage settable from 6.5 to 13.7 Vdc.
+In to -In
+In to -In
For 100 ms
PC to -In
-0.3 to 7.0
-0.3 to 19.0
-0.1 to 30.0
2,250
VC to -In
+Out to -Out
Isolation voltage
Output current
Peak output current
Output power
Peak output power
Case temperature
Input to Output
Continuous
For 1 ms
25
37.5
A
The VTM V048K120T025’s nominal output voltage is
12 Vdc from a 48 Vdc input Factorized Bus, Vf, and is
controllable from 6.5 to 13.7 Vdc at no load, and from
6.5 to 13.4 Vdc at full load, over a Vf input range of
26 to 55 Vdc. It can be operated either open- or closed-
loop depending on the output regulation needs of the
application. Operating open-loop, the output voltage
tracks its Vf input voltage with a transformation ratio,
K = 1/4 , for applications requiring a programmable
output voltage at high current and high efficiency.
Closing the loop back to an input Pre-Regulation Module
(PRM) or DC-DC converter enables tight load regulation.
300
W
Continuous
For 1 ms
450
W
208
°C
During reflow
Operating junction temperature(1)
-40 to 125
-55 to 125
°C
°C
T - Grade
M - Grade
Storage temperature
-40 to 150
-65 to 150
°C
°C
T - Grade
M - Grade
Note:
(1) The referenced junction is defined as the semiconductor having the highest temperature.
This temperature is monitored by a shutdown comparator.
The 12 V VTM achieves break-through power density of
1200 W/in3 in a V•I Chip package compatible with
standard pick-and-place and surface mount assembly
processes. The V•I Chip BGA package supports in-board
mounting with a low profile of 0.16" (4 mm) over the
board.
Part Numbering
A J-lead package option supports on-board surface
mounting with a profile of only 0.25" (6 mm) over the
board. The VTM’s fast dynamic response and low noise
eliminate the need for bulk capacitance at the load,
substantially increasing the POL density while improving
reliability and decreasing cost.
V
048
K
120 T
025
Voltage
Transformation
Module
Output Voltage
Designator
(=VOUT x10)
Output Current
Designator
(=IOUT)
Input Voltage
Designator
Configuration Options
Product Grade Temperatures (°C)
Grade
T
M
Storage Operating
-40 to150 -40 to125
-65 to150 -55 to125
F
= On-board (Figure 15)
K = In-board (Figure 14)
vicorpower.com
800-735-6200
V•I Chip Voltage Transformation Module
V048K120T025
Rev. 1.0
Page 1 of 16