Datasheet > 904093-1

904093-1

更新时间： 2022-02-26 13:09:42

品牌	Logo	应用领域
泰科 - TE		/
页数	文件大小	规格书
5页	336K
描述
Mass Insertion Terminating Head

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

904093-1 数据手册

Instruction Sheet

Mass Insertion Terminating Head 58644-1

for MTA (Mass Termination Assembly) 100

Feed-Through Receptacle Connectors

408-4406

28 OCT 11 Rev C

Wire Guide

Ram

Wire Inserter

Locating Pawl (Hidden)

Insertion Rod Adjuster

Push Rod

Figure 1

Reasons for reissue are provided in Section 8,

REVISION SUMMARY.

1. INTRODUCTION

Mass Insertion Terminating Head 58644-1, shown in

Figure 1, is designed to terminate MTA 100 feed-

through receptacle connectors (positions 2 through

12) onto discrete wire sizes 28 through 22 AWG with a

maximum insulation diameter of 1.27 mm [.050 in.].

Refer to Figure 2 for reference connector part

numbers.

2. DESCRIPTION (Figure 1)

The terminating head, when properly installed onto the

handle assembly, serves as a guide for the connector

during termination.

Features of the head and their functions are as

follows:

This head is designed to terminate one connector

at a time.

NOTE

Wire Inserter-supports each wire in individual wire

slots so that, during the insertion cycle, the wire forced

into the two-slotted beam of the contact.

Wire Guide-holds the wires in position over the wire

inserter.

A complete list of current connector part numbers

cannot be maintained on this document. For all part

NOTE

numbers and their description, refer to Catalog

82056 or contact Product Information at the

number at the bottom of this page.

Ram-locates and holds the connector while pushing it

down onto the wires.

Locating Pawl-holds connector in proper alignment to

The head is used with Pistol Grip Manual Handle

Assembly 58074-1. For terminating head installation

procedures, and setup and operation of the handle

assembly, refer to Instruction Sheet 408-6790. Read

this and the referenced material before terminating

any connectors.

the wire inserter.

Push Rod-used to push the terminated connector past

the locating pawl for removal.

Insertion Rod Adjuster-is a piston for the ram and

regulates the travel of the inserted wires.

Dimensions on this sheet are in metric units [with

U.S. customary units in brackets]. Figures are not

NOTE

drawn to scale.

*Trademark



This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com

1 of 5

PRODUCT INFORMATION 1-800-522-6752

LOC B

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.

12 3 4 5

下载PDF

与904093-1相关器件

型号	品牌	描述	获取价格	数据表
90-41	COILCRAFT	Axial Lead Chokes	获取价格
90410	NTE	1000V CERAMIC DISC	获取价格
904-114P51SX	AMPHENOL	CONNECTOR, SSMB CONNECTOR	获取价格
904-117J-51SX	AMPHENOL	RF SSMB Connector, 1 Contact(s), Panel Mount, Locking, Jack	获取价格
904132-1	TE	ANVIL	获取价格
904132-3	TE	ANVIL, COMBINATION	获取价格