IDT 89HPES8NT2 Data Sheet
Signal
Type
Name/Description
MSMBADDR[4:1]
I
Master SMBus Address. These pins determine the SMBus address of the
serial EEPROM from which configuration information is loaded.
MSMBCLK
I/O
Master SMBus Clock. This bidirectional signal is used to synchronize
transfers on the master SMBus. It is active and generating the clock only
when the EEPROM is being accessed.
MSMBDAT
SSMBADDR[5,3:1]
SSMBCLK
I/O
I
Master SMBus Data. This bidirectional signal is used for data on the mas-
ter SMBus.
Slave SMBus Address. These pins determine the SMBus address to
which the slave SMBus interface responds.
I/O
I/O
Slave SMBus Clock. This bidirectional signal is used to synchronize trans-
fers on the slave SMBus.
SSMBDAT
Slave SMBus Data. This bidirectional signal is used for data on the slave
SMBus.
Table 2 SMBus Interface Pins
Signal
Type
Name/Description
GPIO[0]
I/O
General Purpose I/O.
This pin can be configured as a general purpose I/O pin.
GPIO[1]
GPIO[2]
I/O
I/O
General Purpose I/O.
This pin can be configured as a general purpose I/O pin.
Alternate function pin name: PECRSTN
Alternate function pin type: Output
Alternate function: Reset output for downstream port C
General Purpose I/O.
This pin can be configured as a general purpose I/O pin.
Alternate function pin name: PALINKUPN
Alternate function pin type: Output
Alternate function: Port A link up status output
GPIO[3]
GPIO[4]
I/O
I/O
General Purpose I/O.
This pin can be configured as a general purpose I/O pin.
General Purpose I/O.
This pin can be configured as a general purpose I/O pin.
Alternate function pin name: PCLINKUPN
Alternate function pin type: Output
Alternate function: Port C link up status output
GPIO[5]
I/O
General Purpose I/O.
This pin can be configured as a general purpose I/O pin.
Alternate function pin name: FAILOVERP
Alternate function pin type: Input
Alternate function: NTB upstream port failover
GPIO[6]
GPIO[7]
I/O
I/O
General Purpose I/O.
This pin can be configured as a general purpose I/O pin.
General Purpose I/O.
This pin can be configured as a general purpose I/O pin.
Table 3 General Purpose I/O Pins
4 of 28
November 12, 2007