Datasheet > 828BR

828BR

更新时间： 2024-01-03 18:31:59

品牌	Logo	应用领域
FREQUENCYDEVICES		过滤器
页数	文件大小	规格书
8页	474K
描述
8 Bit Programmable 4-Pole Pair Filters

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

828BR 技术参数

是否Rohs认证：	不符合	生命周期：	Contact Manufacturer
包装说明：	,	Reach Compliance Code：	unknown
风险等级：	5.78	Base Number Matches：	1

828BR 数据手册

Product Handling

Procedure

Programmable Filter Modules Power Sequence & ESD

November 2000

Programmable Filters Modules

818, 824, 828, 828BP, 828BR, 854, 858, R854, R858

I. Scope

The following precautions are necessary when handling and installing Frequency Devices

programmable filter modules.

II. Digital Circuit Description

The digital input pins connect directly to 4000 series CMOS logic, such as the 4053 analog switch. The

power supply (Vss) for the digital logic on the module comes directly from the +15 Volt pin on the

module. This sets the threshold voltage at 11.0 V minimum to 15.0 V maximum for a "1" (High) level

and 0.0 V minimum to 4.0 V maximum for a "0" (Low) level. Applying a voltage between 4.0 and 11.0

V will produce unpredictable operation. Connecting 5 Volt or 3.3 V logic devices directly to the filter

module without using a voltage translator will result in erratic operation of the filter.

III. (VERY IMPORTANT) Power-Up and Power-Down Sequence

Do not plug-in or un-plug module while power is applied. It is imperative that power is

supplied to the + 15 V pin on the filter module before or at the same instance that any digital pin is

pulled High (> 0.0 V). Failure to do this will result in excessive current flowing through the digital input

pin and through a protection diode internal to the 4000 logic, which will result in damage to the module.

The proper power-up and power-down sequence is:

1. Connect filter module ground.

2. Connect filter module +15 V.

3. Connect filter module -15 V.

4. Connect the input signal.

All four of the above steps can also occur simultaneously. Power-down should occur in the reverse

order.

IV. ESD Issues

Like most modern electronic equipment, the modules can be damaged by electrostatic discharge (ESD).

The modules are shipped from the factory in sealed, anti-static packaging and should be kept in the

sealed package prior to mounting on a circuit board. The following additional rules should also be

observed when handling the modules after they are removed from the factory packaging:

1. Only a person wearing a properly grounded wrist strap should handle the modules.

2. Any work surface that the modules are placed on must be properly ESD grounded.

3. Any insulating materials capable of generating static charge (such as paper) should be kept

away from the modules.

Static generating clothing should be covered with an ESD-protective smock.

1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176

e-mail: sales@freqdev.com • Web Address: http://www.freqdev.com

1 2 3 456 7 8

下载PDF

与828BR相关器件

型号	品牌	描述	获取价格	数据表
828BR4	ETC	8 Bit Programmable 4-Pole Pair Filters	获取价格
828BR4/10-2	FREQUENCYDEVICES	8 Bit Programmable 4-Pole Pair Filters	获取价格
828BR4/10-3	FREQUENCYDEVICES	8 Bit Programmable 4-Pole Pair Filters	获取价格
828BR4/10-4	FREQUENCYDEVICES	8 Bit Programmable 4-Pole Pair Filters	获取价格
828BR4/3-2	FREQUENCYDEVICES	8 Bit Programmable 4-Pole Pair Filters	获取价格
828BR4/3-3	FREQUENCYDEVICES	8 Bit Programmable 4-Pole Pair Filters	获取价格