6KA24
Vishay General Semiconductor
www.vishay.com
PAR® Transient Voltage Suppressors
High Temperature Stability and High Reliability Conditions
FEATURES
• Junction passivation optimized design
passivated anisotropic rectifier technology
• TJ = 185 °C capability suitable for high
reliability and automotive requirement
• Excellent clamping capability
• Low leakage current
• High surge capability
P600
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
PRIMARY CHARACTERISTICS
VWM
24 V
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting,
especially for automotive load dump protection application.
VBR
26.7 V to 36.2 V
6000 W
2000 W
6.5 W
P
PPM (10 x 1000 μs)
P
PPM (10 μs/50 ms)
MECHANICAL DATA
PD
Case: P600, molded epoxy over passivated junction
Molding compound meets UL 94 V-0 flammability rating
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
(“_X” denotes revision code e.g. A, B, .....)
IRSM
IFSM
90 A
400 A
TJ max.
Polarity
Package
185 °C
Uni-directional
P600
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
HE3 suffix meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
LIMIT
6000
UNIT
with 10/1000 μs waveform (1)
with 10μs/50 ms waveform (2)
Peak pulse power dissipation
PPPM
W
2000
Power dissipation on infinite heatsink at TL = 75 °C (fig. 3)
Maximum working stand-off voltage
PD
VWM
6.5
W
V
24
Peak forward surge current 8.3 ms single half sine-wave (3)
IFSM
400
A
Operating junction and storage temperature range
TJ, TSTG
-65 to +185
°C
Notes
(1)
(2)
(3)
Non-repetitive current pulse, per fig. 2, with a 10/1000μs waveform
Non-repetitive current pulse, per fig. 5, with a 10 μs/50 ms waveform
Measured on 8.3 ms half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN VOLTAGE
TEST CURRENT
STAND-OFF VOLTAGE
V
BR AT IT
(V)
DEVICE TYPE
IT
VWM
(V)
(mA)
MIN.
MAX.
6KA24
26.7
32.6
100
24
Revision: 18-Apr-16
Document Number: 88309
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000