Non-Contacting Hall Effect Single Turn
Position Sensor
6120 Series
Electrical Specifications1
Output voltage
0.25 Vdc to 4.75 Vdc typical (see Feature Codes table)
Output overvoltage limits
Output current
10 Vdc to –0.3 Vdc; output may be shorted to ground or supply without damage
±8 mA max.
1 kΩ min., 10 kΩ typical
Output load
Input voltage
4.5 to 5.5 Vdc
Supply voltage absolute limits
Independent linearity2
Hysteresis
20 Vdc max., -10 Vdc min.
±0.5% (0.25% available)
0.2% max.
Resoluꢀon
0.088° for 360° travel, 0.011° for 45° travel
7.5 mA typical, 11 mA max.
750 V rms
Supply current
Dielectric strength
Insulaꢀon resistance
Electrostaꢀc discharge (ESD)
Bulk current injecꢀon (BCI)
Actual electrical travel
Temperature coefficient of output voltage
1,000 megΩ min.
Passes 2 kV human body model and 15 kV air discharge
Passes 2-500 MHz at 200 mA
360° typical (see ordering informaꢀon)
±20 ppm/°C
Mechanical Specifications
Total mechanical travel
Bearing
360° conꢀnuous (320° with stop feature)
Bearing bronze bushing
0.6 oz. typical
Weight
Staꢀc stop strength
Panel nut ꢀghtening torque
Supply voltage absolute limits
Independent linearity
Hysteresis
40 in. oz.
25 in. lb. max.
20 Vdc max., -10 Vdc min.
±0.5% (0.25% available)
0.2% max.
Resoluꢀon
0.088° for 360° travel, 0.011° for 45° travel
TT Electronics | BI Technologies
Circulo de la Amistad #102 PIMSA IV Mexicali B.C. Mexico C.P 21210
General Note
TT Electronics reserves the right to make changes in product specificaꢀon without
noꢀce or liability. All informaꢀon is subject to TT Electronics’ own data and is
considered accurate at ꢀme of going to print.
Ph: +1 714 447 2345
www.ꢁelectronics.com/bi-technologies
Issue C 04/2019 Page 2
© TT electronics plc