DATASHEET
LOCO™ PLL CLOCK MULTIPLIER
IDT5V40512
Description
Features
The IDT5V40512 is the most cost effective way to generate
a high-quality, high frequency clock output and a reference
clock from a lower frequency crystal or clock input. The
name LOCO stands for Low Cost Oscillator, as it is
designed to replace crystal oscillators in most electronic
systems. Using Phase-Locked-Loop (PLL) techniques, the
device uses a standard fundamental mode, inexpensive
crystal to produce output clocks up to 133.3 MHz. With a
reference output, this chip plus an inexpensive crystal can
replace two oscillators
• Packaged as 8-pin SOIC or MSOP
• Available in Pb (lead ) free package
• Upgrade of popular ICS502 with zero ppm multiplication
error
• Easy to cascade with other 5xx series
• Input crystal frequency of 5 - 27 MHz
• Input clock frequency of 2 - 50 MHz
• Output clock frequencies up to 133.3 MHz
• Compatible with all popular CPUs
• Duty cycle of 45/55 up to 133.3 MHz
• Mask option for nine selectable frequencies
• Operating voltage of 3.0 V
Stored in the chip’s ROM is the ability to generate nine
different multiplication factors, allowing one chip to output
many common frequencies (see table on page 2).
This product is intended for clock generation. It has low
output jitter (variation in the output period), but input to
output skew and jitter are not defined or guaranteed. For
applications which require defined input to output skew, use
the ICS570B.
• Industrial temperature version
• Advanced, low power CMOS process
Block Diagram
VDD
PLL Clock
Synthesis
and Control
Circuitry
CLK
REF
2
S1, S0
X1/ICLK
Crystal or
Clock input
Crystal
Oscillator
X2
Optional crystal
capacitors
GND
IDT™ LOCO™ PLL CLOCK MULTIPLIER
1
IDT5V40512
REV D 51309