1.3 Absolute maximum ratings. 1/ 2/
Supply volatge (+V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +19 V dc
CC
Supply volatge (-V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -19 V dc
CC
Differential input voltage 3/ . . . . . . . . . . . . . . . . . . . . . . . . . . . +V
to -V
to -V
CC
CC
CC
CC
Input voltage range (V ) (any input) . . . . . . . . . . . . . . . . . . . . . +V
Input current (I ) (each input) . . . . . . . . . . . . . . . . . . . . . . . . . ±1 mA
Output current (I ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±80 mA
I
I
O
Total current into +V
terminal . . . . . . . . . . . . . . . . . . . . . . . 160 mA
terminal . . . . . . . . . . . . . . . . . . . . . . . -160 mA
CC
CC
Total current into -V
Duration of short circuit current at ( or below) +25 C 4/ . . . . Unlimited
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 C to +150 C
Junction temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150 C
Power dissipation (P )
D
Case C 5/ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1375 mW
Case D 5/ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 680 mW
Case H 5/ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 675 mW
Case P 5/ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1050 mW
Case 2 5/ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1375 mW
Thermal resistance, junction-to-case (
) . . . . . . . . . . . . . . See MIL-STD-1835
JC
1.4 Recommended operating conditions.
Supply voltage (±V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±2.25 V dc minimum, ±19 V dc maximum
CC
Common-mode input voltage (V ) (±V
Common-mode input voltage (V ) (±V
IC
Ambient operating free-air temperature (T ) . . . . . . . . . . . . . -55 C to +125 C
Source resistance from ground to input terminals (R ) . . . . . 50
S
= ±5 V) . . . . . . . . -0.8 V dc minimum, 5 V dc maximum
= ±15 V) . . . . . . . -10.8 V dc minimum, 15 V dc maximum
IC
CC
CC
A
2. APPLICABLE DOCUMENTS
2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of
this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue
of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation.
SPECIFICATION
MILITARY
MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for.
1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the
maximum levels may degrade performance and affect reliability.
2/ All voltage values, except differential voltages, are with respect to the midpoint between +V
3/ Differential voltages are at the noninverting input with respect to the inverting input.
and -V .
CC
CC
4/ The output may be shorted to either supply. Temperature and supply voltage must be limited to ensure that the maximum
dissipation rating is not exceeded.
5/ Above T = +25 C derate at a factor of 11 mW/ C for cases C and 2, 8 mW/ C for case D, 5.4 mW/ C for case H,
A
and 8.4 mW/ C for case P.
SIZE
STANDARD
5962-94602
A
MICROCIRCUIT DRAWING
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43216-5000
REVISION LEVEL
A
SHEET
3
DESC FORM 193A
JUL 94