Function Table
Inputs
Functional Description
Outputs
The ’FCT573 contains eight D-type latches with TRI-STATE
output buffers. When the Latch Enable (LE) input is HIGH,
data on the Dn inputs enters the latches. In this condition the
latches are transparent, i.e., a latch output will change state
each time its D input changes. When LE is LOW the latches
store the information that was present on the D inputs a
setup time preceding the HIGH-to-LOW transition of LE. The
TRI-STATE buffers are controlled by the Output Enable (OE)
input. When OE is LOW, the buffers are in the bi-state mode.
When OE is HIGH the buffers are in the high impedance
mode but this does not interfere with entering new data into
the latches.
OE
L
LE
H
H
L
D
H
L
O
H
L
L
L
X
X
O0
Z
H
X
=
=
=
H
L
X
O
HIGH Voltage Level
LOW Voltage Level
Immaterial
=
Value stored from previous clock cycle
0
Logic Diagram
DS100951-3
Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.
www.national.com
2