LMP91050
www.ti.com
SNAS517D –NOVEMBER 2011–REVISED MARCH 2013
LMP91050 Configurable AFE for Nondispersive Infrared (NDIR) Sensing Applications
Check for Samples: LMP91050
1
FEATURES
DESCRIPTION
The LMP91050 is a programmable integrated Sensor
Analog Front End (AFE) optimized for thermopile
sensors, as typically used in NDIR applications. It
provides a complete signal path solution between a
sensor and microcontroller that generates an output
voltage proportional to the thermopile voltage. The
LMP91050's programmability enables it to support
multiple thermopile sensors with a single design as
opposed to the multiple discrete solutions.
2
•
Programmable Gain Amplifier
“Dark Signal” Offset Cancellation
Supports External Filtering
•
•
•
Common Mode Generator and 8 bit DAC
APPLICATIONS
•
•
•
•
•
•
•
NDIR Sensing
Demand Control Ventilation
Building Monitoring
The LMP91050 features
a programmable gain
amplifier (PGA), “dark phase” offset cancellation, and
an adjustable common mode generator (1.15V or
2.59V) which increases output dynamic range. The
PGA offers a low gain range of 167V/V to 1335V/V
plus a high gain range of 1002V/V to 7986V/V which
enables the user to utilize thermopiles with different
sensitivities. The PGA is highlighted by low gain drift
(100 ppm/°C), output offset drift (1.2mV/°C at G =
1002 V/V), phase delay drift (500ns) and noise
specifications (0.1 μVRMS 0.1 to 10Hz) . The offset
cancellation circuitry compensates for the “dark
signal” by adding an equal and opposite offset to the
input of the second stage, thus removing the original
offset from the output signal. This offset cancellation
circuitry allows optimized usage of the ADC full scale
and relaxes ADC resolution requirements.
CO2 Cabin Control — Automotive
Alcohol Detection — Automotive
Industrial Safety and Security
GHG & Freons Detection Platforms
KEY SPECIFICATIONS
•
•
•
•
•
Programmable gain 167 to 7986 V/V
Low noise (0.1 to 10 Hz) 0.1 μVRMS
Gain Drift 100 ppm/°C (max)
Phase Delay Drift 500 ns (max)
Power supply voltage range 2.7 to 5.5 V
The LMP91050 allows extra signal filtering (high
pass, low pass or band pass) through dedicated pins
A0 and A1, in order to remove out of band noise. The
user can program through the on board SPI interface.
Available in a small form factor 10–pin package, the
LMP91050 operates from -40 to +105°C.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011–2013, Texas Instruments Incorporated
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
