53D Series
53D Specifications
Item
Characteristics
ꢃ
ꢂ
Operating Temperature Range
Rated Voltage Range
Capacitance Range
Capacitance Tolerance
Leakage Current
40 to 85ꢀC
6.3 to 450VDC
ꢂ
15 to 220,000ꢀF at 25ꢀC, 120Hz
ꢃ
ꢂ
ꢂ
10% to 50% (F) at 25ꢀC, 120Hz
ꢂ
ꢂ
I ꢅ K CV : K = 6.0 at 25ꢀC, 36 at 85ꢀC after 5 minutes.
Where I=Leakage current (ꢀA), C=Nominal capacitance (ꢀF) and V=Rated voltage (V)
ꢃ ꢂ
At 120Hz, capacitance ratio C( 40ꢀC)/C( 25ꢀC)
Low Temperature
Characteristics
DC Rated Voltage (V)
0-40
35%
41-63
45%
64-100
60%
101-350
20%
351-450
15%
Capacitance Remaining
ꢃ
ꢂ
At 120Hz, equivalent series resistance ratio ESR( 40ꢀC)/ ESR( 25ꢀC)
DC Rated Voltage (V)
Multiplier
0-40
60
41-63
55
64-100
65
101-350
180
351-450
190
Ripple Current Multipliers
Ambient Temperature (ꢀC)
Refer to Section 4 of the
Mini-Glossary for explanation
of Ripple Current Multipliers.
≤ꢂ
45ꢀC
ꢂ
ꢂ
ꢂ
65ꢀC
75ꢀC
85ꢀC
2.0
1.7
1.4
1.0
Frequency (Hz)
DC Rated Voltage
0-50V
50-60Hz
0.85
300-400Hz
>1kHz
1.15
1.10
1.15
1.30
51-299V
0.85
1.20
≥ 300V
0.80
1.40
ꢂ
The following specifications shall be satisfied when the capacitors are restored to 25ꢀC after
subjecting them to the DC rated voltage for 1,000 hours at 85ꢀC.
Life Validation Test
Shelf Test
ꢂ
Capacitance change: ≤ 15% from initial measurement
ESR change
Leakage current
: ≤ 1.5ꢄinitial specified limit
: ≤ initial specified limit
ꢂ
The following specifications shall be satisfied when the capacitors are restored to 25ꢀC after
ꢂ
exposing them for 500 hours at 85ꢀC without voltage applied. The rated voltage shall be
applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than
48 hours before the measurements.
Capacitance change: ≤ 10% from initial measurement
ESR change
Leakage current
: ≤ 1.3ꢄinitial specified limit
: ≤ 2ꢄinitial specified limit
Part Numbering System for 53D Series When ordering, always specify complete catalog number for 53D Series.
53D 562 063 JP
F
6
Case Style: 6 = PVC Sleeve is Standard.
Case Code: See dimensions in RatingsTables.
DC Rated Voltage: Expressed in Volts. Zeros proceed the voltage rating
when less than 100 volts. An R indicates a decimal point (e.g. 6R3 = 6.3V).
ꢃ
ꢂ
Capacitance Tolerance: F = 10% to 50%
Capacitance Value: Expressed in Microfarads. The first two digits are
significant figures, the third digit indicates the number of zeros
(e.g. 560 = 56ꢀF; 561= 560ꢀF; 562 = 5,600ꢀF).
Series Name: Indicates Basic Capacitor Design.
278
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com