Si534
3. Ordering Information
The Si534 XO was designed to support a variety of options including frequency, temperature stability, output
format, and V . Specific device configurations are programmed into the Si534 at time of shipment. Configurations
DD
can be specified using the Part Number Configuration chart below. Silicon Laboratories provides a web browser-
based part number configuration utility to simplify this process. Refer to www.silabs.com/VCXOPartNumber to
access this tool and for further ordering instructions. The Si534 is supplied in an industry-standard, RoHS
compliant, 6-pad, 5 x 7 mm package.
X
X
B
G
R
534
XXXXXX
R = Tape & Reel
Blank = Trays
534 Quad XO
Product Family
Operating Temp Range (°C)
–40 to +85 °C
G
Device Revision Letter
1st Option Code
6-digit Frequency Designator Code
Four unique frequencies can be specified within the following bands of frequencies: 10 to
945 MHz, 970 to 1134 MHz, and 1213 to 1417 MHz. A six digit code will be assigned for
the specified combination of frequencies. Codes > 000100 refer to quad XOs
programmed with the lowest frequency value selected when FS[1:0] = 00, and the highest
value when FS[1:0] = 11. Six digit codes < 000100 refer to quad XOs programmed with
the highest frequency value selected when FS[1:0] = 00, and the lowest value when
FS[1:0] = 11.
Code
A
B
C
D
E
F
G
H
J
VDD
3.3
3.3
Output Format
LVPECL
LVDS
CMOS
CML
LVPECL
LVDS
CMOS
CML
3.3
DD
3.3
2.5
2.5
2.5
2.5
1.8
1.8
CMOS
CML
2nd Option Code
K
Code Temperature Stability (ppm, max, ±)
Note:
A
B
50
20
CMOS available to 160 MHz.
Example Part Number: 534AB000108BGR is a 5 x 7 mm quad XO in a 8 pad package. Since the six digit code (000108) is >
000100, f0 is 644.53125 MHz (lower frequency) and f1 is 693.48299 (higher frequency), with a 3.3 V supply and LVPECL output.
Temperature stability is specified as ± 20 ppm. The part is specified for a –40 to +85 C° ambient temperature range operation and is
shipped in tape and reel format.
Figure 1. Part Number Convention
6
Preliminary Rev. 0.4