Si530/531
3. Ordering Information
The Si530/531 XO was designed to support a variety of options including frequency, temperature stability, output
format, and V . Specific device configurations are programmed into the Si530/531 at time of shipment.
DD
Configurations can be specified using the Part Number Configuration chart below. Silicon Laboratories provides a
web browser-based part number configuration utility to simplify this process. Refer to
www.silabs.com/VCXOPartNumber to access this tool and for further ordering instructions. The Si530 and Si531
XO series are supplied in an industry-standard, RoHS compliant, 6-pad, 5 x 7 mm package. The 531 Series
supports an alternate OE pinout (pin #1) for the LVPECL, LVDS, and CML output formats. See Tables 9 and 10 for
the pinout differences between the Si530 and Si531 series.
X
530
XXXMXXX
G
R
X
B
Tape & Reel Packaging
Blank = Trays
530 XO Product
Family
Operating Temp Range (°C)
-40 to +85°C
G
1st Option Code
VDD Output Format Output Enable Polarity
Part Revision Letter
Frequency (e.g., 622M080 is 622.080 MHz)
A
B
C
D
E
F
G
H
J
K
M
N
P
Q
R
S
T
3.3 LVPECL
3.3 LVDS
3.3 CMOS
3.3 CML
High
High
High
High
High
High
High
High
High
High
Low
Low
Low
Low
Low
Low
Low
Low
Low
Low
Available frequency range is 10 to 945 MHz, 970 to 1134 MHz, and
1213 to 1417 MHz. The position of “M” shifts to denote higher or lower
frequencies. If the frequency of interest requires greater than 6 digit
resolution, a six digit code will be assigned for the specific frequency.
2.5 LVPECL
2.5 LVDS
2.5 CMOS
2.5 CML
2nd Option Code
1.8 CMOS
1.8 CML
Temp Stability (ppm, max, ±)
A
B
50
20
3.3 LVPECL
3.3 LVDS
3.3 CMOS
3.3 CML
2.5 LVPECL
2.5 LVDS
2.5 CMOS
2.5 CML
U
V
W
1.8 CMOS
1.8 CML
Note:
CMOS available to 160 MHz.
Example P/N: 530AB622M080BGR is a 5 x 7 XO in a 6 pad package. The frequency is 622.080 MHz, with a 3.3 V supply, LVPECL output,
and Output Enable active high polarity. Temperature stability is specifed as ±20 ppm. The part is specified for –40 to +85 °C ambient
temperature range operation and is shipped in tape and reel format.
Figure 1. Part Number Convention
Rev. 1.0
7