Datasheet > 418P39302KD1

418P39302KD1

更新时间： 2023-03-15 00:00:00

品牌	Logo	应用领域
威世 - VISHAY		/
页数	文件大小	规格书
5页	272K
描述
CAPACITOR, FILM/FOIL, POLYESTER, 200 V, 0.039 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

418P39302KD1 数据手册

Type 418P

Vishay Sprague

Polyester Capacitors

Filmite^®“E”, ORANGE DROP^®, Radial Lead

FEATURES

• Identical performance characteristics to Type

225P pressed polyester capacitors through 600

WVDC ratings

RoHS

• Wound from PETP polyester film and thin gauge

foil under carefully controlled atmospheric

conditions

COMPLIANT

• Protected against moisture by a conformal coating of

epoxy

• Specifically designed for printed wiring board applications

• Widely used in computers, instrumentation and

telecommunications equipment

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55 °C to + 85 °C, standard; up to

+ 105 °C when WVDC is reduced to 70 % of + 85 °C rating.

To + 125 °C when WVDC is 50 % of + 85 °C rating.

for not more than 5 seconds. Capacitance rated 1000 volts

and above shall withstand a DC potential of 200 % of rated

voltage applied between the terminals for not more than 5

seconds. The test voltage must be applied and discharged

through a resistor of 1 ohm per volt.

Insulation Resistance: After a 2 minute charge at rated

voltage or 500 V, whichever is less.

Humidity Test:

At + 25 °C: 100 000 Megohm for C ≤ 0.25 Microfarads

25000 Megohm - Microfarads for C > 0.25 Microfarads

At + 85 °C: 10 000 Megohm for C ≤ 0.15 Microfarads

1500 Megohm - Microfarads for C > 0.15 Microfarads

At + 105 °C: 1500 Megohm for C ≤ 0.17 Microfarads

250 Megohm - Microfarads for C > 0.17 Microfarads

At + 125 °C: 200 Megohm for C ≤ 0.13 Microfarads

25 Megohm - Microfarads for C > 0.13 Microfarads

Condition capacitors with no voltage applied for 72 hours at

95 % relative humidity and + 75 °C. Remove capacitors from

humidity chamber, wipe surface dry of moisture and dry in

circulating air for 4 hours. Measure insulation resistance after

a 2 minute charge at 25 °C and rated voltage or 500 VDC,

whichever is less. Minimum product of insulation resistance

and capacitance shall be 5000 Megohm - Microfarads after

test but need not exceed 10 000 Megohm. Not more than

one failure allowed in 12 units tested.

Capacitance Tolerance and Dissipation Factor:

Capacitors shall be measured at a frequency for 1000 Hz at

+ 25 °C or else be referred to measurements made at that

frequency and temperature. The maximum dissipation factor

shall be 0.75 %.

DC Life Test:

Capacitance are capable of withstanding a 500 hour life test

at + 85 °C at 150 % of rated working voltage. After test,

capacitance shall not have changed by more than 5 % of

initial value, insulation resistance shall not have decreased

by more than 50 % of the initial limit and dissipation factor

shall not have increased to more than 1 %.

Dielectric Withstanding Voltage:

Capacitors rated below 1000 volts shall withstand a DC

potential of 250 % of rated voltage applied between terminals

DIMENSIONS in inches [millimeters]

Max.

0.237

[6.019]

Max.

0.237

[6.019]

Max.

0.237

[6.019]

Max.

1.250

[31.750]

Min.

Lead

Length

Lead

Length

0.032 [0.813] Dia.

(No. 20 AWG)

Tinned Copper-Clad Steel

0.030 [0.762]

0.060 [1.524]

0.030 [0.762]

Terminal A

Terminal B

Terminal D

Case

Code

(Max.)

Terminal A and B

0.500 [12.700]

0.688 [17.475]

0.969 [24.613]

1.344 [34.138]

Terminal D

0.375 [9.525]

0.719 [18.263]

1.094 [27.788]

0.70 [17.78]

0.90 [22.86]

1.20 [30.48]

1.60 [40.64]

Document Number: 42017

Revision: 16-Feb-07

For technical questions, contact: spresale@vishay.com

www.vishay.com

12 3 4 5

中文翻译

下载PDF

与418P39302KD1相关器件

型号	品牌	获取价格	描述	数据表
418P39306LB1	CDE	获取价格	CAPACITOR, FILM/FOIL
418P39306LD1	VISHAY	获取价格	CAPACITOR, FILM/FOIL, POLYESTER, 600 V, 0.039 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS
418P39306LH2	CDE	获取价格	CAPACITOR, FILM/FOIL
418P39351KD2XXX	VISHAY	获取价格	CAP,POLYESTER (MYLAR),39NF,100VDC,5% -TOL,5% +TOL
418P39351LA3XXX	VISHAY	获取价格	CAP,POLYESTER (MYLAR),39NF,100VDC,5% -TOL,5% +TOL
418P39352KA3	VISHAY	获取价格	CAPACITOR, FILM/FOIL, POLYESTER, 200 V, 0.039 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS
418P39354LB3	CDE	获取价格	CAPACITOR, FILM/FOIL
418P39354LD1	CDE	获取价格	CAPACITOR, FILM/FOIL
418P39354LD2	VISHAY	获取价格	CAP,POLYESTER (MYLAR),39NF,400VDC,5% -TOL,5% +TOL
418P39354LF1	CDE	获取价格	CAPACITOR, FILM/FOIL

与418P39302KD1相关文章

LM317T数据手册解读：产品特性、应用、封装与引脚详解
2024-06-14

13
一文带你了解?DB3二极管好坏判断、参数信息、替代推荐
2024-06-14

15
LM358DR数据手册：引脚说明、电气参数及替换型号推荐
2024-06-14

10
OP07CP数据手册解读：引脚信息、电子参数
2024-06-14

16

产品中心

服务支持

精选活动

关于我们

帮助中心

418P39302KD1

418P39302KD1 数据手册

与418P39302KD1相关器件

与418P39302KD1相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

418P39302KD1

418P39302KD1 数据手册

与418P39302KD1相关器件

与418P39302KD1相关文章

您还可以找

您在本页遇到什么问题？