41206ESDA-TR1

更新时间： 2024-02-02 22:04:08

品牌	Logo	应用领域
库柏 - COOPER		瞬态抑制器二极管光电二极管局域网
页数	文件大小	规格书
4页	93K
描述
The best ESD protection for high frequency, low voltage applications

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

41206ESDA-TR1 技术参数

是否Rohs认证：	符合	生命周期：	Active
包装说明：	ROHS COMPLIANT PACKAGE-8	Reach Compliance Code：	compliant
ECCN代码：	EAR99	HTS代码：	8533.40.80.70
风险等级：	1.56	其他特性：	LOW CAPACITANCE
配置：	SEPARATE, 4 ELEMENTS	二极管元件材料：	SILICON
二极管类型：	TRANS VOLTAGE SUPPRESSOR DIODE	JESD-30 代码：	R-PDSO-N8
元件数量：	4	端子数量：	8
封装主体材料：	PLASTIC/EPOXY	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE	峰值回流温度（摄氏度）：	NOT SPECIFIED
极性：	BIDIRECTIONAL	认证状态：	Not Qualified
表面贴装：	YES	技术：	AVALANCHE
端子形式：	NO LEAD	端子位置：	DUAL
处于峰值回流温度下的最长时间：	NOT SPECIFIED	Base Number Matches：	1

41206ESDA-TR1 数据手册

41206ESDA, Four Element

Array Chip, Polymer ESD

Suppressor With SurgX^®Technology

Features:

• The best ESD protection for high frequency, low voltage applications.

• Protects up to 4 separate lines with one device

• Exceeds testing requirements outlined in IEC 61000-4-2

• Extremely low capacitance

• Very low leakage current

• Fast response time

• Bi-directional

• Surface mount

• Solder Termination

• RoHS Compliant

Description:

The ESDA product family with SurgX^®Technology is

specifically designed to protect sensitive electronic circuits

from the threat of electrostatic discharge (ESD). 4-line array

can protect up to 4 isolated lines simultaneously with perfor-

mance similar to individual chip devices. ESDA devices react

almost instantaneously to the transient voltage and effectively

clamp it in an average of 35V for the duration of the ESD tran-

sient, meaning less voltage stress during the clamp period and

greater IC protection. The design of ESDA series inherently

produces an ultra low capacitance part. In the off state the

product is virtually invisible to the circuit. Installed from signal

line to ground, it is especially transparent to the high-speed

digital circuits due to the high off-state impedance and low

capacitance. Signals are not distorted or disrupted as shown

by extensive testing. With ESDA series, waveform definition

stays true and high-speed signals do not suffer. ESDA series

utilize a unique polymer-based material. The nature of the

material creates a bi-directional part, which means that only

one device is required to provide complete ESD protection

regardless of the surge polarity. The combination of this mate-

rial with proven thick film on ceramic technology produces a

reliable, surface mount product that will help protect mobile

communications, computers, data processing, test equipment,

and many other electronic applications from ESD.

Part Ratings and Characteristics:

Notes:

Performance Characteristics

Units

Min

Typ

Max

1. The product is 100% tested for 30V operating voltage at 25°C.

Continuous operation with higher than 12VDC under extreme

temperature and humidity may cause increasing leakage cur-

rent and/or shifting device resistance. However, even under

severe environmental test, characteristics of the device did not

change up to 12VDC operation.

Continuous operating voltage

Clamping voltage³

Trigger voltage⁴

ESD Threat voltage capability⁵

Capacitance (@ 1 KHz ~ 1.8GHz)

Leakage current (@ 12 VDC)

Peak current³

VDC

12¹

300

150

2. Some shifting in characteristics may occur when tested over

several hundred ESD pulses at very rapid rate of 1 pulse per

second or faster.

0.15

<0.1

3. Per IEC 61000-4-2, 30A @ 8kV, level 4, clamp measurement

made 30 ns after initiation of pulse, all tests in contact dis-

charge mode.

0.01

4. Trigger measurement made using Transmission Line Pulse

(TLP) method.

+105

Operating temperature

ESD pulse withstand ³

°C

-40

+25

>500²

5. PolySurg™ devices are capable of withstanding up to a 15 kV,

45A ESD pulse. Device ratings are given at 8kV per Note 1,

unless otherwise specified.

# pulses

Environmental Specifications:

• Moisture Resistance: MIL-STD-883, Method 1004.7, 85°C, 85%R.H., 240 hrs.

• Thermal shock: MIL-STD-202, Method 107G, -65°C to 125°C, 30 min. cycle, 5 cycles

• Vibration: MIL-STD-202F, Method 201A,(10 to 55 to 10 Hz, 1 min. cycle, 2 hrs each in X-Y-Z)

• Chemical resistance: ASTM D-543, 24 hrs @ 50°C, 3 solutions (H2O, detergent solution, defluxer)

• Full load voltage: Up to 24 VDC, 1000 hrs, 25°C

• Solder leach resistance and terminal adhesion: Per EIA-576

• Solderability: MIL-STD-202, Method 208 (95% coverage)

12 3 4

下载PDF

与41206ESDA-TR1相关器件

型号	品牌	描述	获取价格	数据表
41206L	SWITCH	Toggle Switch, DPDT, Latched, Solder Terminal, Lever Actuator, Panel Mount-threaded,	获取价格
4120-G	ETAL	Extra low voltage wiring systems on all types of vehicles for land sea and air	获取价格
4120-G110-J1M1	ETAL	Extra low voltage wiring systems on all types of vehicles for land sea and air	获取价格
4120-G110-J2M1	ETAL	Extra low voltage wiring systems on all types of vehicles for land sea and air	获取价格
4120-G110-J3M1	ETAL	Extra low voltage wiring systems on all types of vehicles for land sea and air	获取价格
4120-G110-K1M1	ETAL	Extra low voltage wiring systems on all types of vehicles for land sea and air	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

41206ESDA-TR1

41206ESDA-TR1 技术参数

41206ESDA-TR1 数据手册

与41206ESDA-TR1相关器件

与41206ESDA-TR1相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

41206ESDA-TR1

41206ESDA-TR1 技术参数

41206ESDA-TR1 数据手册

与41206ESDA-TR1相关器件

与41206ESDA-TR1相关文章

您还可以找

您在本页遇到什么问题？