380-002
EMI/RFI Non-Environmental Backshell
with Strain Relief
Type A - Direct Coupling - Low Profile
TABLE III: FRONTADAPTER
See inside back cover fold-out or pages 13 and 14
J Max - Conn. Designator
Shell
Size
A-E-F
J-H-L-S
for unabridged Tables I and II.
D-B-G-K
C
TABLE IV: ELBOW DIMENSIONS
08/09 1.180(30.0) 1.440 (36.6)
10/11 1.180(30.0) 1.440 (36.6)
Elbow
Size
E
F
G
H
Max
Max
Max
Max
12/13 1.180(30.0) 1.440 (36.6) 1.735(44.1)
14/15 1.180(30.0) 1.440 (36.6) 1.915(48.6)
16/17 1.380(35.0) 1.560(39.6) 1.915(48.6)
18/19 1.380(35.0) 1.560(39.6) 1.915(48.6)
20/21 1.380(35.0) 1.560(39.6) 1.915(48.6)
22/23 1.380(35.0) 1.560(39.6) 1.915(48.6)
24/25 1.380(35.0) 1.560(39.6) 1.915(48.6)
28/29 1.610 (40.9) 1.560(39.6) 1.915(48.6)
32/33 1.610(40.9) 1.750(44.5) 1.915(48.6)
36 1.610(40.9) 1.750(44.5) 1.915(48.6)
40 1.610(40.9) 2.190(55.6) 1.915(48.6)
04 .567 (14.4) 1.187 (30.1) .636 (16.2) 1.200 (30.5)
06 .630 (16.0) 1.250 (31.8) .710 (18.0) 1.320 (33.5)
08 .692 (17.6) 1.312 (33.3) .731 (18.6) 1.340 (34.0)
10 .755 (19.2) 1.655 (42.0) .825 (21.0) 1.660 (42.2)
12 .848 (21.5) 1.765 (44.8) .988 (25.1) 1.750 (44.5)
16 1.036 (26.3) 1.952 (49.6) 1.087 (27.6) 1.925 (48.9)
20 1.130 (28.7) 2.098 (53.3) 1.325 (33.7) 2.033 (51.6)
24 1.255 (31.9) 2.155 (54.7) 1.337 (34.0) 2.200 (55.9)
28 1.317 (33.5) 2.250 (57.2) 1.827 (46.4) 2.450 (62.2)
32 1.348 (34.2) 2.343 (59.5) 2.027 (51.5) 2.450 (62.2)
TABLE X: CABLE ENTRY
TABLE II: STANDARD FINISHES
GLENAIR
SYMBOL FINISH
Dash
No.
04
06
08
10
12
16
20
T
Max
V
Cable Range
Max
Min
Max
B
M
Cadmium Plate, Olive Drab
Electroless Nickel
.780 (19.8)
.957 (24.3)
.125 (3.2)
.250 (6.4)
.312 (7.9)
.350 (8.9)
.500 (12.7)
.625 (15.9)
.875 (22.2)
.312 (7.9)
.437 (11.1)
.562 (14.3)
.625 (15.9)
.750 (19.1)
.937 (23.8)
1.250 (31.8)
1.375 (34.9)
1.625 (41.3)
1.875 (47.6)
.780 (19.8) 1.145 (29.1)
.780 (19.8) 1.332 (33.8)
.780 (19.8) 1.332 (33.8)
.811 (20.6) 1.551 (39.4)
.905 (23.0) 1.770 (45.0)
1.092 (27.7) 2.113 (53.7)
NF
Cadmium Plate, Olive Drab
Over Electroless Nickel
See Inside Back Cover
for Additional Finish Options
1. When maximum cable entry (page 22) is
exceeded, Style 2 will be supplied.
(Function S only.)
2. Metric dimensions (mm) are indicated in
parentheses.
24
28
32
1.124 (28.5) 2.363 (60.0) 1.000 (25.4)
1.399 (35.5) 2.770 (70.4) 1.250 (31.8)
1.399 (35.5) 3.020 (76.7) 1.437 (36.5)
3. Cable range is defined as the accommo-
dations range for
the wire bundle
or cable. Dimen-
sions shown are
not intended for
inspection
TABLE XI: CABLE ENTRY
Dash
No.
W
Max
X
Max
Y
Z
Cable Range
Max
Max
Min **
Max
03* .437 (11.1) .760 (19.3) .843 (21.4)
04* .437 (11.1) .760 (19.3) .906 (23.0)
06* .500 (12.7) .760 (19.3) 1.093 (27.8)
.630 (16.0) .156 (4.0) .250 (6.4)
.755 (19.2) .188 (4.8) .312 (7.9)
.942 (23.9) .281 (7.1) .438 (11.1)
criteria.
4. Consult factory
for shorter
08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .344 (8.7) .562 (14.3)
10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9)
12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1)
16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .562 (14.3) .938 (23.8)
20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .750 (19.1) 1.250 (31.8)
24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) .781 (19.8) 1.375 (34.9)
28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) .969 (24.6) 1.625 (41.3)
32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.125 (28.6) 1.875 (47.6)
40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) 1.469 (37.3) 2.375 (60.3)
lengths on
straight
backshells.
5. Refer to pages
18 and 19 for
connector desig-
nator B part
numberdevelop-
ment.
* Not available in Style M clamp.
** Not Applicable Style D
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
Series 38 - Page 19